Dry Etching Characteristics of InGaZnO Thin Films Under Inductively Coupled Plasma–Reactive-Ion Etching with Hydrochloride and Argon Gas Mixture
Materials · 20.12.2024 · 17 (24) · 6241
DOI: 10.3390/ma17246241 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 20.12.2024. Verfasst von Changyong Oh und 6 weiteren Autor:innen. Beteiligte Einrichtung: DRAM Process Architecture Team, Samsung Electronics, Hwaseong-si 18448, Gyeonggi-do, Republic of Korea. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea, Ministry of Education (MOE), Ministry of Trade, Industry & Energy (MOTIE), Republic of Korea.
Abstract (Originalsprache)
Inductively coupled plasma–reactive etching (ICP-RIE) of InGaZnO (IGZO) thin films was studied with variations in gas mixtures of hydrochloride (HCl) and argon (Ar). The dry etching characteristics of the IGZO films were investigated according to radiofrequency bias power, gas mixing ratio, and chamber pressure. The IGZO film showed an excellent etch rate of 83.2 nm/min from an optimized etching condition such as a plasma power of 100 W, process pressure of 3 mTorr, and HCl ratio of 75% (HCl:Ar at 30 sccm:10 sccm). In addition, this ICP-RIE etching condition with a high HCl composition ratio at a moderate RIE power of 100 W showed a low etched pattern skew and low photoresist damage on the IGZO patterns. It also provided excellent surface morphology of the SiO2 film underneath after the entire dry etching of the IGZO layer. The IGZO thin film as an active layer was successfully patterned under the ICP-RIE dry etching under the HCl-Ar gas mixture, affording an excellent electrical characteristic in the resultant top-gate IGZO thin-film transistor.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- DRAM Process Architecture Team, Samsung Electronics, Hwaseong-si 18448, Gyeonggi-do, Republic of Korea.
- Department of Applied Physics, Korea University, Sejong 30019, Republic of Korea.
- E ICT-Culture Sports Track, Korea University, Sejong 30019, Republic of Korea.
- Division of Display and Semiconductor Physics, Korea University, Sejong 30019, Republic of Korea.
- Department of Computer Information Science, Korea University, Sejong 30019, Republic of Korea.
ORCID-Profile: Bo Sung Kim
Förderung
- National Research Foundation of Korea
- Ministry of Education (MOE)
- Ministry of Trade, Industry & Energy (MOTIE), Republic of Korea
Zitieren
APA
Oh, C., Ju, M. W., Jeong, H., Song, J. H., Kim, B. S., Lee, D. G., & Cho, C. (2024). Dry Etching Characteristics of InGaZnO Thin Films Under Inductively Coupled Plasma–Reactive-Ion Etching with Hydrochloride and Argon Gas Mixture. Materials, 17(24), 6241. https://doi.org/10.3390/ma17246241
Vancouver
Oh C, Ju MW, Jeong H, Song JH, Kim BS, Lee DG, et al. Dry Etching Characteristics of InGaZnO Thin Films Under Inductively Coupled Plasma–Reactive-Ion Etching with Hydrochloride and Argon Gas Mixture. Materials. 2024;17(24):6241. doi:10.3390/ma17246241
BibTeX
@article{Oh2024,
author = {Oh, Changyong and Ju, Myeong Woo and Jeong, Hojun and Song, Jun Ho and Kim, Bo Sung and Lee, Dae Gyu and Cho, ChoongHo},
title = {Dry Etching Characteristics of InGaZnO Thin Films Under Inductively Coupled Plasma–Reactive-Ion Etching with Hydrochloride and Argon Gas Mixture},
journal = {Materials},
year = {2024},
volume = {17},
number = {24},
pages = {6241},
doi = {10.3390/ma17246241}
}
EUVIMED