Utilization of Copper Flotation Tailings in Geopolymer Materials Based on Zeolite and Fly Ash
Materials · 14.12.2024 · 17 (24) · 6115
DOI: 10.3390/ma17246115 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 14.12.2024. Verfasst von Marija Štulović und 6 weiteren Autor:innen. Beteiligte Einrichtung: Innovation Center of the Faculty of Technology and Metallurgy in Belgrade Ltd., University of Belgrade, Karnegijeva 4, 11120 Belgrade, Serbia. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science, Technological Development and Innovation of the Republic of Serbia.
Abstract (Originalsprache)
Copper flotation tailings (FTs), resulting from the separation and beneficiation processes of ores, are a significant source of environmental pollution (acid mine drainage, toxic elements leaching, and dust generation). The most common disposal method for this industrial waste is dumping. However, due to their favorable physical and chemical properties—the high content of aluminosilicate minerals (60–90%)—flotation tailings can be effectively treated and reused through geopolymerization technology, thereby adding value to this waste. The objective of this study was to evaluate the potential of utilizing the geopolymerization of FTs to produce sustainable materials. Geopolymers based on natural zeolite (NZ), sodium-modified natural zeolite (NaZ), and fly ash (FA) were prepared using 20%, 35%, and 50% of FTs, activated with a 10 M NaOH solution. The study investigated the influence of Ca/Si, Si/Al, and Na/Al molar ratios on the structural, thermal, and mechanical properties (XRD, TG/DTG and unconfined compressive strength, UCS), and contaminant immobilization (TCLP method) of geopolymers. Geochemical modeling via the PHREEQC program was employed to interpret the results. The findings indicated that the UCS value decreased in zeolite-based geopolymers as the content of FT increased due to the inertness of the tailings and the low calcium content in the system (Ca/Si ≤ 0.3), in contrast to the FA-based geopolymer. The highest UCS of 44.3 MPa was recorded in an FA-based geopolymer containing 50% flotation tailings, with optimal molar ratios of 0.4 for Ca/Si, 3.0 for Si/Al, and 1.1 for Na/Al. In conclusion, the geopolymerization process has been determined to be a suitable technological approach for the sustainable treatment and reuse of FTs.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Innovation Center of the Faculty of Technology and Metallurgy in Belgrade Ltd., University of Belgrade, Karnegijeva 4, 11120 Belgrade, Serbia.
- Innovative Centre of the Faculty of Chemistry, University of Belgrade, Studentski Trg 12-16, 11000 Belgrade, Serbia.
- Faculty of Technology and Metallurgy, University of Belgrade, Karnegijeva 4, 11120 Belgrade, Serbia.
ORCID-Profile: Marija Štulović, Dragana Radovanović, Jelena Dikić, Jovana Djokić
Förderung
- Ministry of Science, Technological Development and Innovation of the Republic of Serbia
Zitieren
APA
Štulović, M., Radovanović, D., Dikić, J., Gajić, N., Djokić, J., Kamberović, Ž., & Jevtić, S. (2024). Utilization of Copper Flotation Tailings in Geopolymer Materials Based on Zeolite and Fly Ash. Materials, 17(24), 6115. https://doi.org/10.3390/ma17246115
Vancouver
Štulović M, Radovanović D, Dikić J, Gajić N, Djokić J, Kamberović Ž, et al. Utilization of Copper Flotation Tailings in Geopolymer Materials Based on Zeolite and Fly Ash. Materials. 2024;17(24):6115. doi:10.3390/ma17246115
BibTeX
@article{tulovi2024,
author = {Štulović, Marija and Radovanović, Dragana and Dikić, Jelena and Gajić, Nataša and Djokić, Jovana and Kamberović, Željko and Jevtić, Sanja},
title = {Utilization of Copper Flotation Tailings in Geopolymer Materials Based on Zeolite and Fly Ash},
journal = {Materials},
year = {2024},
volume = {17},
number = {24},
pages = {6115},
doi = {10.3390/ma17246115}
}
EUVIMED