EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Vanadium Addition on the Wear Resistance of Al0.7CoCrFeNi High-Entropy Alloy

Marzena Tokarewicz iD, Malgorzata Gradzka-Dahlke iD, Wojciech J Nowak iD, Andrzej Gradzik, Miroslaw Szala iD, Mariusz Walczak iD

Materials · 09.12.2024 · 17 (23) · 6021

DOI: 10.3390/ma17236021 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 09.12.2024. Verfasst von Marzena Tokarewicz und 5 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Mechanical Engineering, Bialystok University of Technology, Wiejska 45 C, 15-351 Bialystok, Poland. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Higher Education of Republic of Poland, “VIA CARPATIA Universities of Technology Network named after the President of the Republic of Poland Lech Kaczynski”.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High-entropy alloys are of interest to many researchers due to the possibility of shaping their functional properties by, among other things, the use of alloying additives. One approach to improving the wear resistance of the AlCoCrFeNi alloy is modification through the addition of titanium. However, in this study, an alternative solution was explored by adding vanadium, which has a completely different effect on the material’s structure compared to titanium. The effect of vanadium additives on changes in the microstructure, hardness, and wear resistance of the Al0.7CoCrFeNi alloy. The base alloys Al0.7CoCrFeNi and Al0.7CoCrFeNiV0.5 were obtained by induction melting. The results showed that the presence of vanadium changes the microstructure of the material. In the case of the base alloy, the structure is biphasic with a visible segregation of alloying elements between phases. In contrast, the Al0.7CoCrFeNiV0.5 alloy has a homogeneous solid solution bcc structure. The presence of vanadium increased hardness by 33%, while it significantly reduced friction wear by 73%. Microscopic observations of friction marks indicate differences in the wear mechanisms of the two materials.

Schlagwörter

Stichwörter der Autor:innen

Al0.7CoCrFeNiAl0.7CoCrFeNiV0.5high-entropy alloyswear resistance

Autor:innen und Institutionen

  • Faculty of Mechanical Engineering, Bialystok University of Technology, Wiejska 45 C, 15-351 Bialystok, Poland.
  • Faculty of Mechanical Engineering and Aeronautics, Rzeszow University of Technology, Powstanców Warszawy 12, 35-959 Rzeszow, Poland.
  • Department of Materials Engineering, Mechanical Engineering Faculty, Lublin University of Technology, Nadbystrzycka 36, 20-618 Lublin, Poland.

ORCID-Profile: Marzena Tokarewicz, Malgorzata Gradzka-Dahlke, Wojciech J Nowak, Miroslaw Szala, Mariusz Walczak

Förderung

  • Ministry of Science and Higher Education of Republic of Poland
  • “VIA CARPATIA Universities of Technology Network named after the President of the Republic of Poland Lech Kaczynski”

Zitieren

APA

Tokarewicz, M., Gradzka-Dahlke, M., Nowak, W. J., Gradzik, A., Szala, M., & Walczak, M. (2024). Effect of Vanadium Addition on the Wear Resistance of Al0.7CoCrFeNi High-Entropy Alloy. Materials, 17(23), 6021. https://doi.org/10.3390/ma17236021

Vancouver

Tokarewicz M, Gradzka-Dahlke M, Nowak WJ, Gradzik A, Szala M, Walczak M. Effect of Vanadium Addition on the Wear Resistance of Al0.7CoCrFeNi High-Entropy Alloy. Materials. 2024;17(23):6021. doi:10.3390/ma17236021

BibTeX
@article{Tokarewicz2024,
  author = {Tokarewicz, Marzena and Gradzka-Dahlke, Malgorzata and Nowak, Wojciech J and Gradzik, Andrzej and Szala, Miroslaw and Walczak, Mariusz},
  title = {Effect of Vanadium Addition on the Wear Resistance of Al0.7CoCrFeNi High-Entropy Alloy},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {23},
  pages = {6021},
  doi = {10.3390/ma17236021}
}
Kostenlos starten →