EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Controlled and Safe Hydrogen Generation from Waste Aluminum and Water, a New Approach to Hydrogen Generation

Xavier Salueña-Berna iD, Marc Marín-Genescà iD, Ramon Mujal Rosas, Manuel-Jose Lis Arias iD

Materials · 30.11.2024 · 17 (23) · 5885

DOI: 10.3390/ma17235885 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 30.11.2024. Verfasst von Xavier Salueña-Berna und 3 weiteren Autor:innen. Beteiligte Einrichtung: Mechanical Engineering Department, ESEIAAT-UPC, Colom 11, 08222 Terrassa, Spain. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A new method is proposed to generate hydrogen in situ at low pressure from powder-pressed recycled aluminum turnings activated with small amounts of NaOH and drops of water. The contribution of this system is that the user can obtain small flows of high-purity hydrogen (>99%) to charge their portable electronic devices in remote places, in a simple, controlled, and safe way, since only water is used. Test tubes that contain tiny amounts of NaOH on their surface can be transported and used without contact. In addition to being a safer system, a smaller amount of NaOH and water is needed compared to other systems, there is no need to preheat the water, and the system can even generate heat. As the feeding is drop by drop, the hydrogen flow can be easily controlled by manual or automatic dosing. The waste obtained is solid and contains mostly aluminum hydroxide with some NaOH and impurities from the waste of origin, which are easy to sell and recycle. A study has been carried out to optimize the type of test tubes and establish critical parameters. The results show that a constant and controllable flow rate of hydrogen can be obtained depending on the drip frequency where the chemical reaction predominates over diffusion, that the optimal amount of NaOH is 20 wt%, that a finer grain size can increase the H2 yield with respect to the stoichiometric value but reduces the instantaneous flow with respect to that obtained with larger grains, and that it is very important to control the density and the impurities to increase porosity and therefore water diffusion. The estimated cost of the hydrogen produced is 3.15 EUR/kgH2 and an energy density of 1.12 kWh/kg was achieved with a test tube of 92% aluminum purity and 20 wt% NaOH.

Schlagwörter

Stichwörter der Autor:innen

Al + NaOH test tubesaluminum breakage scrapaluminum–water apparatusaluminum–water reactionhydrogen generationhydrogen reactorportable hydrogen generationsustained hydrogen

Autor:innen und Institutionen

  • Mechanical Engineering Department, ESEIAAT-UPC, Colom 11, 08222 Terrassa, Spain.
  • Mechanical Engineering Department, ETSEQ-URV, Països Catalans 26, 43007 Tarragona, Spain.
  • Electric Engineering Department, ETSEIAAT-UPC, Colom 11, 08222 Terrassa, Spain.
  • Chemical Engineering Department, ESEIAAT-UPC, Colom 11, 08222 Terrassa, Spain.

ORCID-Profile: Xavier Salueña-Berna, Marc Marín-Genescà, Manuel-Jose Lis Arias

Zitieren

APA

Salueña-Berna, X., Marín-Genescà, M., Mujal Rosas, R., & Arias, M. L. (2024). Controlled and Safe Hydrogen Generation from Waste Aluminum and Water, a New Approach to Hydrogen Generation. Materials, 17(23), 5885. https://doi.org/10.3390/ma17235885

Vancouver

Salueña-Berna X, Marín-Genescà M, Mujal Rosas R, Arias ML. Controlled and Safe Hydrogen Generation from Waste Aluminum and Water, a New Approach to Hydrogen Generation. Materials. 2024;17(23):5885. doi:10.3390/ma17235885

BibTeX
@article{SalueaBerna2024,
  author = {Salueña-Berna, Xavier and Marín-Genescà, Marc and Mujal Rosas, Ramon and Arias, Manuel-Jose Lis},
  title = {Controlled and Safe Hydrogen Generation from Waste Aluminum and Water, a New Approach to Hydrogen Generation},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {23},
  pages = {5885},
  doi = {10.3390/ma17235885}
}
Kostenlos starten →