EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Characterization of Myrrh Extract Effect on Polylactide and Polypropylene Melt Spun Multifilament Yarn Structure and Properties

Evaldas Bolskis iD, Egidijus Griškonis iD, Mindaugas Marksa, Lina Ragelienė iD, Erika Adomavičiūtė

Materials · 28.11.2024 · 17 (23) · 5843

DOI: 10.3390/ma17235843 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 28.11.2024. Verfasst von Evaldas Bolskis und 4 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Mechanical Engineering and Design, Kaunas University of Technology, Studentu St. 56, 51424 Kaunas, Lithuania. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 87 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Myrrh has unique medicinal properties: it is an anti-inflammatory, antifungal, and antibacterial material. The aim of this study was to assess the influence of ethanolic myrrh extract on the production and properties of modified PP and PLA melt spun yarns. In this work, multifilament yarns of polylactide (PLA) and polypropylene (PP) containing 10 wt% myrrh resin at different melt-spinning drawing ratios (DRs) were prepared. The results of scanning electron microscopy revealed that the multifilament yarns from polymers covered by myrrh resin extract had a smooth surface without cracks or visible myrrh derivatives. The influence of myrrh resin on the mechanical properties of PP and PLA multifilament yarns was analyzed, and it was found that the presence of myrrh (PP/M, PLA/M) increased tenacity (cN/tex) and decreased the tensile strain (%) of melt spun yarns obtained at different draw ratios (DRs). During optical analysis, it was found that the absorbance of yarns increased in the entire UV region of the spectra, which was most likely determined by the presence of myrrh. The degree of crystallinity and the wetting angle of PP/M and PLA/M multifilament yarns increased compared with the pure PLA and PP multifilament yarns. This study concludes that the presence of myrrh derivatives influences PLA yarns degradation rate and antibacterial effects against Gram-positive bacteria.

Schlagwörter

Stichwörter der Autor:innen

PLAantibacterial activitymelt spinningmultifilament yarnsmyrrh

Autor:innen und Institutionen

  • Faculty of Mechanical Engineering and Design, Kaunas University of Technology, Studentu St. 56, 51424 Kaunas, Lithuania.
  • Faculty of Chemical Technology, Kaunas University of Technology, Radvilenu Rd. 19, 50254 Kaunas, Lithuania.
  • Department of Analytical and Toxicological Chemistry, Lithuanian University of Health Sciences, Sukileliu Avenue 13, 50162 Kaunas, Lithuania.
  • Faculty of Natural Sciences, Vytautas Magnus University, Universiteto St. 10, Akademija, 53362 Kaunas, Lithuania.

ORCID-Profile: Evaldas Bolskis, Egidijus Griškonis, Lina Ragelienė

Zitieren

APA

Bolskis, E., Griškonis, E., Marksa, M., Ragelienė, L., & Adomavičiūtė, E. (2024). Characterization of Myrrh Extract Effect on Polylactide and Polypropylene Melt Spun Multifilament Yarn Structure and Properties. Materials, 17(23), 5843. https://doi.org/10.3390/ma17235843

Vancouver

Bolskis E, Griškonis E, Marksa M, Ragelienė L, Adomavičiūtė E. Characterization of Myrrh Extract Effect on Polylactide and Polypropylene Melt Spun Multifilament Yarn Structure and Properties. Materials. 2024;17(23):5843. doi:10.3390/ma17235843

BibTeX
@article{Bolskis2024,
  author = {Bolskis, Evaldas and Griškonis, Egidijus and Marksa, Mindaugas and Ragelienė, Lina and Adomavičiūtė, Erika},
  title = {Characterization of Myrrh Extract Effect on Polylactide and Polypropylene Melt Spun Multifilament Yarn Structure and Properties},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {23},
  pages = {5843},
  doi = {10.3390/ma17235843}
}
Kostenlos starten →