EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Research on the Measurement Technology for Pretension Stress on Small-Sized Bolts Based on the Piezoelectric Ultrasonic Resonance Method

Bing Chen iD, Chunlang Luo, Li Xia, Lintao Xu, Guanglong Yan, Feifei Qiu, Guoqing Gou

Materials · 26.11.2024 · 17 (23) · 5802

DOI: 10.3390/ma17235802 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 26.11.2024. Verfasst von Bing Chen und 6 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Advanced Technologies of Materials, Ministry of Education, School of Materials Science and Engineering, Southwest Jiaotong Universi…. Die Arbeit wurde bisher 88-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Market Supervision Administration Research Project, Key Research and Development Plan of Sichuan Province, Natural Science Foundation of Sichuan Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

With the widespread application of small-sized bolts in aerospace and other fields, the demand for measuring their connection structures is increasing. Currently, although ultrasonic longitudinal wave methods are commonly used for bolt pretension stress measurement, their accuracy is limited for small-sized bolts. This paper proposes a piezoelectric acoustic resonance method (PZTAR) for small-sized bolt pretension stress measurement based on acoustic elasticity theory, ultrasonic resonance principles, and a bolt stress–strain model. The method involves analyzing the ultrasonic time-domain signals of small-sized bolts under load in the frequency domain to better evaluate the changes in the ultrasonic frequencies under different pretension stress. The effectiveness of this method is verified through pretension stress measurement experiments. The results indicate that the proposed ultrasonic resonance method achieves an average error of less than 5% for M5 specification bolts. Compared to traditional ultrasonic time delay methods, the proposed method demonstrates higher measurement accuracy. Additionally, the ultrasonic resonance method exhibits better robustness during the measurement process.

Schlagwörter

Stichwörter der Autor:innen

bolt pretensionsmall-sized boltsultrasonic resonance methodultrasonic time delay methods

Autor:innen und Institutionen

  • Key Laboratory of Advanced Technologies of Materials, Ministry of Education, School of Materials Science and Engineering, Southwest Jiaotong University, Chengdu 610031, China.
  • Zhejiang Academy of Special Equipment Science, Hangzhou 310009, China.

ORCID-Profile: Bing Chen

Förderung

  • the Market Supervision Administration Research Project
  • Key Research and Development Plan of Sichuan Province
  • Natural Science Foundation of Sichuan Province
  • Market Supervision Administration Research Project

Zitieren

APA

Chen, B., Luo, C., Xia, L., Xu, L., Yan, G., Qiu, F., & Gou, G. (2024). Research on the Measurement Technology for Pretension Stress on Small-Sized Bolts Based on the Piezoelectric Ultrasonic Resonance Method. Materials, 17(23), 5802. https://doi.org/10.3390/ma17235802

Vancouver

Chen B, Luo C, Xia L, Xu L, Yan G, Qiu F, et al. Research on the Measurement Technology for Pretension Stress on Small-Sized Bolts Based on the Piezoelectric Ultrasonic Resonance Method. Materials. 2024;17(23):5802. doi:10.3390/ma17235802

BibTeX
@article{Chen2024,
  author = {Chen, Bing and Luo, Chunlang and Xia, Li and Xu, Lintao and Yan, Guanglong and Qiu, Feifei and Gou, Guoqing},
  title = {Research on the Measurement Technology for Pretension Stress on Small-Sized Bolts Based on the Piezoelectric Ultrasonic Resonance Method},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {23},
  pages = {5802},
  doi = {10.3390/ma17235802}
}
Kostenlos starten →