Influence of Ag-18Cu-10Zn Filler Material on Microstructure and Properties of Laser-Welded Al/Cu Dissimilar Butt Joints
Materials · 22.11.2024 · 17 (23) · 5726
DOI: 10.3390/ma17235726 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 22.11.2024. Verfasst von Ziquan He und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Hefei University of Technology, Hefei 230009, China. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, National Natural Science Foundation of China Youth Fund.
Abstract (Originalsprache)
Dissimilar welding between aluminum and copper poses significant challenges, primarily due to differences in their thermal and mechanical properties, resulting in brittle intermetallic compounds, limited joint strength, and high electrical resistivity. This study aims to overcome these issues by employing Ag-18Cu-10Zn filler material and optimizing laser power with a focus on improving joint strength and electrical conductivity. The results indicate that the incorporation of silver and zinc enhances the phase composition and microstructure of the weld. By forming solid solution phases such as Ag2Al and Cu5Zn8, the brittle Al2Cu phase commonly found in traditional Al/Cu welding is replaced. This not only promotes the heterogeneous nucleation of fine silver-rich grains but also restricts the excessive growth of silver-poor grains, resulting in a uniform distribution of fine grains throughout the weld. These modifications contribute to both fine-grain strengthening and dispersion strengthening. At an optimal laser power of 750 W, joint strength reaches 109 MPa, while joint resistivity decreases to 3.19 μΩ·cm, 12.6% lower than that of the aluminum alloy base material. This study proposes a process for achieving highly conductive, reliable Al/Cu dissimilar metal joints, potentially impacting the aluminum–copper connections in battery modules for new energy vehicles.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Materials Science and Engineering, Hefei University of Technology, Hefei 230009, China.
Förderung
- National Natural Science Foundation of China
- National Natural Science Foundation of China Youth Fund
Zitieren
APA
He, Z., Liu, F., Gao, P., Pang, L., & Su, Y. (2024). Influence of Ag-18Cu-10Zn Filler Material on Microstructure and Properties of Laser-Welded Al/Cu Dissimilar Butt Joints. Materials, 17(23), 5726. https://doi.org/10.3390/ma17235726
Vancouver
He Z, Liu F, Gao P, Pang L, Su Y. Influence of Ag-18Cu-10Zn Filler Material on Microstructure and Properties of Laser-Welded Al/Cu Dissimilar Butt Joints. Materials. 2024;17(23):5726. doi:10.3390/ma17235726
BibTeX
@article{He2024,
author = {He, Ziquan and Liu, Fei and Gao, Ping and Pang, Lihui and Su, Yong},
title = {Influence of Ag-18Cu-10Zn Filler Material on Microstructure and Properties of Laser-Welded Al/Cu Dissimilar Butt Joints},
journal = {Materials},
year = {2024},
volume = {17},
number = {23},
pages = {5726},
doi = {10.3390/ma17235726}
}
EUVIMED