Constitutive Modelling Analysis and Hot Deformation Process of AISI 8822H Steel
Materials · 22.11.2024 · 17 (23) · 5713
DOI: 10.3390/ma17235713 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 22.11.2024. Verfasst von Khaled Elanany und 2 weiteren Autor:innen. Beteiligte Einrichtung: Silesian University of Technology, 2A Akademicka Str., 44-100 Gliwice, Poland. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study used the Gleeble 3800 thermomechanical simulator to examine the hot deformation characteristics of AISI 8822H steel. The main goal was to understand the alloy’s behaviour under various thermomechanical settings, emphasising temperature ranges between 1173 K and 1323 K and strain rates from 0.01 s−1 to 10 s−1. This study aimed to enhance the alloy’s manufacturing process by offering a thorough understanding of the material’s response to these conditions. Four various constitutive models—Arrhenius-type, Johnson–Cook, modified Johnson–Cook, and Trimble—were used in a comprehensive technique to forecast flow stress values in order to meet the study’s goals. The accuracy of each model in forecasting the behaviour of the material under the given circumstances was assessed. A thorough comparison investigation revealed that the Trimble model was the most accurate model allowing prediction of material behaviour, with the maximum correlation factor (R = 0.99) and at least average absolute relative error (1.7%). On the other hand, the Johnson–Cook model had the least correlation factor (R = 0.92) and the maximum average absolute relative error (32.2%), indicating that it was the least accurate because it could not account for all softening effects.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Silesian University of Technology, 2A Akademicka Str., 44-100 Gliwice, Poland.
- Department of Engineering Materials and Biomaterials, Silesian University of Technology, 18A Konarskiego Str., 44-100 Gliwice, Poland.
- Department of Production Engineering and Mechanical Design, Faculty of Engineering, Tanta University, Tanta 31527, Egypt.
ORCID-Profile: Khaled Elanany, Wojciech Borek
Zitieren
APA
Elanany, K., Borek, W., & Ebied, S. (2024). Constitutive Modelling Analysis and Hot Deformation Process of AISI 8822H Steel. Materials, 17(23), 5713. https://doi.org/10.3390/ma17235713
Vancouver
Elanany K, Borek W, Ebied S. Constitutive Modelling Analysis and Hot Deformation Process of AISI 8822H Steel. Materials. 2024;17(23):5713. doi:10.3390/ma17235713
BibTeX
@article{Elanany2024,
author = {Elanany, Khaled and Borek, Wojciech and Ebied, Saad},
title = {Constitutive Modelling Analysis and Hot Deformation Process of AISI 8822H Steel},
journal = {Materials},
year = {2024},
volume = {17},
number = {23},
pages = {5713},
doi = {10.3390/ma17235713}
}
EUVIMED