EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fracture Criterion Calibration and Finite Element Simulation in SUS304 Stainless Steel

Menglong Xing, Yangchao Liu, Jianwei Lu, Xiaomin Huang, Xinge Wang, Jianqi Xue, Fuming Zhang, Fengshan Du

Materials · 22.11.2024 · 17 (23) · 5711

DOI: 10.3390/ma17235711 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 22.11.2024. Verfasst von Menglong Xing und 7 weiteren Autor:innen. Beteiligte Einrichtung: College of Mechanical Engineering, North China University of Science and Technology, Tangshan 063210, China. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of HeBei Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In order to calibrate the ductile fracture criterion in SUS304 stainless steel, four tensile samples were designed, their finite element models were established, and uniaxial tensile tests were carried out. The simulation results were compared with the tests. Due to the limitations of finite element software, only a few criteria can be solved in MENTAT of MSC.MARC 2013. In order to make the ductile fracture criteria universal, the HYPELA2 subroutine was used to write the ductile fracture criteria, and the three-point bending simulation was used to verify the ductile fracture criteria program. Finally, the calibration results of different fracture criteria are compared with the test results. The results show that the error between the finite element results of four samples and the test results is small, which verifies the feasibility of the finite element model. Based on the Oh criterion, the correctness of HYPELA2 subroutine development is verified by a three-point bending simulation. In the SH sample, the Freudenthal, C-L, and LeRoy criteria have a better prediction ability, and the prediction error of other criteria is relatively large. All the criteria have a strong prediction ability for the NT20 and CH05 samples.

Schlagwörter

Stichwörter der Autor:innen

HYPELA2 subroutineSUS304 stainless steelductile fracture criterionfinite element simulation

Autor:innen und Institutionen

  • College of Mechanical Engineering, North China University of Science and Technology, Tangshan 063210, China.
  • Qing Gong College, North China University of Science and Technology, Tangshan 064000, China.
  • College of Automotive Engineering, Tangshan Polytechnic University, Tangshan 063299, China.
  • Cold Rolling Operation Department, Shougang Jingtang United Iron and Steel Co., Ltd., Tangshan 063200, China.
  • National Engineering Research Center for Equipment and Technology of Cold Strip Rolling, Yanshan University, Qinhuangdao 066004, China.

Förderung

  • National Natural Science Foundation of China
  • Natural Science Foundation of HeBei Province

Zitieren

APA

Xing, M., Liu, Y., Lu, J., Huang, X., Wang, X., Xue, J., Zhang, F., & Du, F. (2024). Fracture Criterion Calibration and Finite Element Simulation in SUS304 Stainless Steel. Materials, 17(23), 5711. https://doi.org/10.3390/ma17235711

Vancouver

Xing M, Liu Y, Lu J, Huang X, Wang X, Xue J, et al. Fracture Criterion Calibration and Finite Element Simulation in SUS304 Stainless Steel. Materials. 2024;17(23):5711. doi:10.3390/ma17235711

BibTeX
@article{Xing2024,
  author = {Xing, Menglong and Liu, Yangchao and Lu, Jianwei and Huang, Xiaomin and Wang, Xinge and Xue, Jianqi and Zhang, Fuming and Du, Fengshan},
  title = {Fracture Criterion Calibration and Finite Element Simulation in SUS304 Stainless Steel},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {23},
  pages = {5711},
  doi = {10.3390/ma17235711}
}
Kostenlos starten →