Study of the Microstructure and Mechanical Properties of Steel Grades for Ship Hull Construction
Materials · 21.11.2024 · 17 (23) · 5687
DOI: 10.3390/ma17235687 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 21.11.2024. Verfasst von Siavash Imanian Ghazanlou und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Applied Sciences, University of Québec at Chicoutimi (UQAC), 555 Boulevard de l'Université, Saguenay, QC G7H 2B1, Canada. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Mitacs, CDCI.
Abstract (Originalsprache)
This paper comprehensively examines three structural steel grades’ microstructural features and mechanical properties, evaluating their suitability for shipbuilding applications. The steels analyzed include quench and tempered (Q and T) steel, thermomechanical controlled processed (TMCP) steel, and hot rolled (HR) steel. A microstructural characterization was performed using optical microscopy (OM), scanning electron microscopy (SEM), and electron backscatter diffraction (EBSD). The analysis was complemented by extensive mechanical testing including assessments of hardness, tensile, and Charpy impact tests across a range of temperatures. Additionally, corrosion behavior was evaluated using the potentiodynamic polarization test. The findings revealed that Q and T grade steel exhibited the most refined microstructure, characterized by a complex mixture of ferrite, tempered martensite, upper bainite, and Fe3C phases. In contrast, the TMCP grade steel demonstrated a balanced microstructure of polygonal ferrite and pearlite. Meanwhile, the HR grade steel contained polygonal ferrite and aligned pearlite. The tensile testing results demonstrated that the Q and T grade steel had superior hardness, yield strength (YS), and ultimate tensile strength (UTS), although it exhibited the lowest elongation % (El %). The TMCP grade steel met all ABS standards for marine steels, displaying optimal YS, UTS, and El %. Despite the superior YS of the HR grade steel, it did not meet the necessary criteria for UTS. Charpy impact tests revealed that the TMCP grade steel exhibited the highest impact energy absorption across a range of temperatures. As a result, the TMCP grade steel emerged as the optimal choice for ship construction, fulfilling all ABS requirements with a balanced combination of strength, ductility, and impact energy absorption. Additionally, the potentiodynamic polarization results revealed that the Q and T grade steel demonstrated the highest corrosion resistance. Following Q and T steel, the HR grade steel ranked second in corrosion resistance, with TMCP steel closely behind, showing only a slight difference.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Applied Sciences, University of Québec at Chicoutimi (UQAC), 555 Boulevard de l'Université, Saguenay, QC G7H 2B1, Canada.
- Chantier Davie Canada Inc., Lévis, QC G6V 0K4, Canada.
- Algoma Steel Inc., 105 West St, Sault Ste. Marie, ON P6A 7B4, Canada.
ORCID-Profile: Siavash Imanian Ghazanlou, Dilip K Sarkar
Förderung
- Mitacs
- CDCI
Zitieren
APA
Imanian Ghazanlou, S., Mobasher Amini, A., Carrier, F. A., Sarkar, D. K., Rehman, K., & Javidani, M. (2024). Study of the Microstructure and Mechanical Properties of Steel Grades for Ship Hull Construction. Materials, 17(23), 5687. https://doi.org/10.3390/ma17235687
Vancouver
Imanian Ghazanlou S, Mobasher Amini A, Carrier FA, Sarkar DK, Rehman K, Javidani M. Study of the Microstructure and Mechanical Properties of Steel Grades for Ship Hull Construction. Materials. 2024;17(23):5687. doi:10.3390/ma17235687
BibTeX
@article{ImanianGhazanlou2024,
author = {Imanian Ghazanlou, Siavash and Mobasher Amini, Ahmad and Carrier, Félix-Antoine and Sarkar, Dilip K and Rehman, Kashif and Javidani, Mousa},
title = {Study of the Microstructure and Mechanical Properties of Steel Grades for Ship Hull Construction},
journal = {Materials},
year = {2024},
volume = {17},
number = {23},
pages = {5687},
doi = {10.3390/ma17235687}
}
EUVIMED