EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fabrication of Mid-Infrared Porous Anodic Alumina Optical Microcavities via Aluminum Anodization

Ewelina Białek iD, Weronika Gruszczyńska, Maksymilian Włodarski iD, Malwina Liszewska iD, Małgorzata Norek iD

Materials · 18.11.2024 · 17 (22) · 5620

DOI: 10.3390/ma17225620 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 18.11.2024. Verfasst von Ewelina Białek und 4 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Materials Science and Engineering, Faculty of Advanced Technologies and Chemistry, Military University of Technology, Str. Gen. Sylwestr…. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Centre in Poland.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study reports the production of mid-infrared (MIR) porous anodic alumina (PAA)-based microcavities with tunable optical quality. The spectral position of the cavity resonance peak (λC), along with its intensity (IR) and Q-factor, varies depending on the geometric positioning of the cavity layer within the multilayer stack of alternating low- and high-porosity layers, as well as the type of cavity produced—either by high voltage (CvH-type) or low voltage (CvL-type) pulses. In most cases, PAA microcavities with CvH-type cavity layers exhibited superior light confinement properties compared to those with CvL-type cavities. Additionally, shifting the cavity layer from the center toward the edges of the multilayer stack enhanced the intensity of the resonance peak. For PAA microcavities with CvH-type cavity layers, the highest intensity (IR = 53%) and the largest Q-factor (Q = 31) were recorded at λC of around 5.1 µm. The anodization approach used in this study demonstrates significant potential for designing PAA-based microcavities with high optical performance in the MIR spectral region, especially with further refinement of electrochemical parameters. These findings pave the way for the development of new photonic materials specifically tailored for the MIR spectral range, broadening their applications in various optoelectronic and sensing technologies.

Schlagwörter

Stichwörter der Autor:innen

anodizationmid-infrared (MIR)optical microcavityphotonic crystalsporous anodic alumina (PAA)

Autor:innen und Institutionen

  • Institute of Materials Science and Engineering, Faculty of Advanced Technologies and Chemistry, Military University of Technology, Str. Gen. Sylwestra Kaliskiego 2, 00-908 Warsaw, Poland.
  • Institute of Optoelectronics, Military University of Technology, Str. Gen. Sylwestra Kaliskiego 2, 00-908 Warsaw, Poland.

ORCID-Profile: Ewelina Białek, Maksymilian Włodarski, Malwina Liszewska, Małgorzata Norek

Förderung

  • National Science Centre in Poland

Zitieren

APA

Białek, E., Gruszczyńska, W., Włodarski, M., Liszewska, M., & Norek, M. (2024). Fabrication of Mid-Infrared Porous Anodic Alumina Optical Microcavities via Aluminum Anodization. Materials, 17(22), 5620. https://doi.org/10.3390/ma17225620

Vancouver

Białek E, Gruszczyńska W, Włodarski M, Liszewska M, Norek M. Fabrication of Mid-Infrared Porous Anodic Alumina Optical Microcavities via Aluminum Anodization. Materials. 2024;17(22):5620. doi:10.3390/ma17225620

BibTeX
@article{Biaek2024,
  author = {Białek, Ewelina and Gruszczyńska, Weronika and Włodarski, Maksymilian and Liszewska, Malwina and Norek, Małgorzata},
  title = {Fabrication of Mid-Infrared Porous Anodic Alumina Optical Microcavities via Aluminum Anodization},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {22},
  pages = {5620},
  doi = {10.3390/ma17225620}
}
Kostenlos starten →