Compositional Design of New Environmentally Friendly Geopolymer Mortar Based on Kaolin and Granite Residues
Materials · 16.11.2024 · 17 (22) · 5610
DOI: 10.3390/ma17225610 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 16.11.2024. Verfasst von Jeicy Ellen Alves de Brito und 8 weiteren Autor:innen. Beteiligte Einrichtung: Programa de Pós-Graduação em Ciência e Engenharia de Materiais (PPG-CEMat), Universidade Federal de Campina Grande, Av. Aprígio Veloso-882, Campina G…. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Conselho Nacional de Desenvolvimento Científico e Tecnológico.
Abstract (Originalsprache)
The use of industrial residues in civil construction is an exciting alternative to mitigate environmental impacts and promote the circular economy. This work developed new compositions of geopolymer mortars activated by NaOH from fine kaolin residue (RCF), coarse kaolin residue (RCG) and granite (RG). All residues were benefited and characterized by chemical analysis (X-ray fluorescence), mineralogical phases (X-ray diffraction) and granulometry (laser granulometry). Additionally, the RCF was calcined at 650 °C for 2 h (RCFC) to produce metakaolin, which is the starting point for the geopolymer reaction. A mixture of experimental designs was accomplished to evaluate the water/binder factor (Wexp (%)) necessary for new geopolymer mortar compositions to reach the consistency index (260 mm, ASTM C1437-15) and the effect of different curing conditions on the simple compressive strength (SCS). The geopolymeric compositions with RCFCs, pre-cured at room temperature, exhibited the highest Wexp% values (>40%) and significant SCS, with curing conditions A and B reaching 6 MPa and 7 MPa, respectively. Such behavior can be explained by the fact that the pre-curing step at room temperature keeps the system humidity relatively high, favoring the dissolution of Si4+ and Al3+ ions and, therefore, increasing the Si/Al ratio, which positively influences the geopolymerization kinetics reaction.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Programa de Pós-Graduação em Ciência e Engenharia de Materiais (PPG-CEMat), Universidade Federal de Campina Grande, Av. Aprígio Veloso-882, Campina Grande 58429-900, PB, Brazil.
- Programa de Pós-Graduação em Ciência de Materiais, Faculdade UnB Planaltina, Universidade de Brasília, Brasília 70904-910, DF, Brazil.
- Laboratório de Tecnologia de Materiais (LTM), Departamento de Engenharia de Materiais, Universidade Federal de Campina Grande, Av. Aprígio Veloso-882, Campina Grande 58429-900, PB, Brazil.
ORCID-Profile: Alisson Mendes Rodrigues, Jucielle Veras Fernandes, Romualdo Rodrigues Menezes, Gelmires de Araújo Neves
Förderung
- Conselho Nacional de Desenvolvimento Científico e Tecnológico
Zitieren
APA
de Brito, J. E. A., Rodrigues, A. M., Fernandes, J. V., Severo, C. G. S., Cartaxo, J. M., Santana, L. N. L., da Silva, M. F. P., Menezes, R. R., & Neves, G. A. (2024). Compositional Design of New Environmentally Friendly Geopolymer Mortar Based on Kaolin and Granite Residues. Materials, 17(22), 5610. https://doi.org/10.3390/ma17225610
Vancouver
de Brito JEA, Rodrigues AM, Fernandes JV, Severo CGS, Cartaxo JM, Santana LNL, et al. Compositional Design of New Environmentally Friendly Geopolymer Mortar Based on Kaolin and Granite Residues. Materials. 2024;17(22):5610. doi:10.3390/ma17225610
BibTeX
@article{deBrito2024,
author = {de Brito, Jeicy Ellen Alves and Rodrigues, Alisson Mendes and Fernandes, Jucielle Veras and Severo, Cibelle Guimarães Silva and Cartaxo, Juliana de Melo and Santana, Lisiane Navarro de Lima and da Silva, Mauro Francisco Pinheiro and Menezes, Romualdo Rodrigues and Neves, Gelmires de Araújo},
title = {Compositional Design of New Environmentally Friendly Geopolymer Mortar Based on Kaolin and Granite Residues},
journal = {Materials},
year = {2024},
volume = {17},
number = {22},
pages = {5610},
doi = {10.3390/ma17225610}
}
EUVIMED