EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Equivalent Heat Source Model of Thermal Relay Contact Based on Surface Roughness of Silver–Magnesium–Nickel Contact

Bo Li iD, Huimin Liang, Pinmou Li, Yuexian Li, Aobo Wang

Materials · 15.11.2024 · 17 (22) · 5583

DOI: 10.3390/ma17225583 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 15.11.2024. Verfasst von Bo Li und 4 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Reliability in Electrical Apparatus and Electronics, Harbin Institute of Technology, Harbin 150001, China. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In a sealed electromagnetic relay, the change in the surface roughness mainly depends on the collision wear between the contact and the moving reed and the ablation effect of the arc on the contact surface based on the strong correlation between the contact resistance and the surface roughness of the Ag-Mg-Ni contact. With a change in contact resistance, the contact temperature increase in a hermetically sealed electromagnetic relay (HSER) is greatly affected. Under extreme overload conditions, the contact surface is severely ablated by the arc, and the roughness increases rapidly with the number of cycles, which greatly affects the contact resistance of the contact surface and the reliability of the relay. A thermal model of a relay contact system based on the surface roughness of Ag-Mg-Ni contacts was established in this paper by analyzing the effect of an arc on the surface roughness of Ag-Mg-Ni contacts under heavy overload conditions. The arc image of the Ag-Mg-Ni contact was recorded using a double-axis arc photographing platform, and the moving track of the arc center under overload conditions was drawn. This paper explored the patterns of arc center movement on the contact surface and the effects of the arc on the surface roughness of the contacts by analyzing the probabilities of the arc center appearing in various locations. A mathematical model correlating the number of contact cycles with contact resistance was established. Subsequently, a finite element simulation model for the equivalent heat source of the contact was developed. The theoretical model error was less than 10%. The accuracy of the equivalent heat source model was verified by comparing the measured data with the simulation results.

Schlagwörter

Stichwörter der Autor:innen

HSERarcequivalent heat sourcesurface roughness

Autor:innen und Institutionen

  • Institute of Reliability in Electrical Apparatus and Electronics, Harbin Institute of Technology, Harbin 150001, China.
  • Harbin Institute of Technology School of Future Technology, Harbin Institute of Technology, Harbin 150001, China.

ORCID-Profile: Bo Li

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Li, B., Liang, H., Li, P., Li, Y., & Wang, A. (2024). Equivalent Heat Source Model of Thermal Relay Contact Based on Surface Roughness of Silver–Magnesium–Nickel Contact. Materials, 17(22), 5583. https://doi.org/10.3390/ma17225583

Vancouver

Li B, Liang H, Li P, Li Y, Wang A. Equivalent Heat Source Model of Thermal Relay Contact Based on Surface Roughness of Silver–Magnesium–Nickel Contact. Materials. 2024;17(22):5583. doi:10.3390/ma17225583

BibTeX
@article{Li2024,
  author = {Li, Bo and Liang, Huimin and Li, Pinmou and Li, Yuexian and Wang, Aobo},
  title = {Equivalent Heat Source Model of Thermal Relay Contact Based on Surface Roughness of Silver–Magnesium–Nickel Contact},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {22},
  pages = {5583},
  doi = {10.3390/ma17225583}
}
Kostenlos starten →