Tuning Biodegradation of Poly (lactic acid) (PLA) at Mild Temperature by Blending with Poly (butylene succinate-co-adipate) (PBSA) or Polycaprolactone (PCL)
Materials · 07.11.2024 · 17 (22) · 5436
DOI: 10.3390/ma17225436 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 07.11.2024. Verfasst von Dimitri Van de Perre und 7 weiteren Autor:innen. Beteiligte Einrichtung: Normec OWS nv, Pantserschipstraat 163, 9000 Ghent, Belgium. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: EC, EU commission.
Abstract (Originalsprache)
Biobased plastics are fully or partially made from biological resources but are not necessarily biodegradable or compostable. Poly (lactic acid) (PLA), one of the most diffused bioplastics, is compostable in industrial environments, but improving degradation in home composting conditions, in soil and in seawater could be beneficial for improving its end of life and general degradability. Blends obtained by the extrusion of PLA with different amounts of poly (butylene succinate-co-adipate) (PBSA) or poly (caprolactone) (PCL) were characterized in terms of their home composting, soil, marine and freshwater biodegradation. The blending strategy was found to be successful in improving the home compostability and soil compostability of PLA. Thanks to the correlations with morphological characterization as determined by electron microscopy, it was possible to show that attaining an almost co-continuous phase distribution, depending on the composition and melt viscosity of the blend components, can enhance PLA degradation in home composting conditions. Tests in marine and freshwater were also performed, and the obtained results showed that in marine conditions, pure PLA is degradable. A comparison of different tests evidenced that salt dissolved in marine water plays an important role in favoring PLA’s degradability.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Normec OWS nv, Pantserschipstraat 163, 9000 Ghent, Belgium.
- Department of Civil and Industrial Engineering, University of Pisa, 56122 Pisa, Italy.
- National Interuniversity Consortium of Materials Science and Technology (INSTM), 50121 Florence, Italy.
- Centexbel, Technologiepark 70, 9052 Ghent, Belgium.
ORCID-Profile: Maria-Beatrice Coltelli, Vito Gigante, Laura Aliotta, Andrea Lazzeri, Ruben Geerinck, Steven Verstichel
Förderung
- EC
- EU commission
Zitieren
APA
Van de Perre, D., Serbruyns, L., Coltelli, M. B., Gigante, V., Aliotta, L., Lazzeri, A., Geerinck, R., & Verstichel, S. (2024). Tuning Biodegradation of Poly (lactic acid) (PLA) at Mild Temperature by Blending with Poly (butylene succinate-co-adipate) (PBSA) or Polycaprolactone (PCL). Materials, 17(22), 5436. https://doi.org/10.3390/ma17225436
Vancouver
Van de Perre D, Serbruyns L, Coltelli MB, Gigante V, Aliotta L, Lazzeri A, et al. Tuning Biodegradation of Poly (lactic acid) (PLA) at Mild Temperature by Blending with Poly (butylene succinate-co-adipate) (PBSA) or Polycaprolactone (PCL). Materials. 2024;17(22):5436. doi:10.3390/ma17225436
BibTeX
@article{VandePerre2024,
author = {Van de Perre, Dimitri and Serbruyns, Lynn and Coltelli, Maria-Beatrice and Gigante, Vito and Aliotta, Laura and Lazzeri, Andrea and Geerinck, Ruben and Verstichel, Steven},
title = {Tuning Biodegradation of Poly (lactic acid) (PLA) at Mild Temperature by Blending with Poly (butylene succinate-co-adipate) (PBSA) or Polycaprolactone (PCL)},
journal = {Materials},
year = {2024},
volume = {17},
number = {22},
pages = {5436},
doi = {10.3390/ma17225436}
}
EUVIMED