Highly Productive Laser Annealing Manufacturing Method Using Continuous Blue WBC (Wavelength Beam Combining) Technique
Materials · 05.11.2024 · 17 (22) · 5399
DOI: 10.3390/ma17225399 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 05.11.2024. Verfasst von Mitsuoki Hishida und 5 weiteren Autor:innen. Beteiligte Einrichtung: Panasonic Connect Co., Ltd., 3-1-1 Inazu-cho, Toyonaka City 561-0854, Osaka, Japan. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Blue laser annealing can be used to obtain a high-mobility thin-film transistor (TFT) through a laser annealing (i.e., LTPS: low-temperature Poly-Si) process. However, the laser annealing process’s low productivity (as well as high cost) is an issue because the high output power of blue lasers still needs to be addressed. Therefore, productivity can be improved if blue laser energy is efficiently supplied during the laser annealing process using a continuous wave laser instead of a conventional pulsed excimer laser. We developed a blue laser light source (440 ± 10 nm) using the wavelength beam combining (WBC) method, which can achieve a laser power density of 73.7 kW/cm2. In this semiconductor laser, when the power was increased s by 2.9 times, the laser scanning speed was increased by 5.0 times, achieving twice the productivity of conventional lasers. After laser annealing, the size of the crystal grains varied between 2 and 15 μm, resulting in a crystallization rate of 100% by Raman scattering rsult and low resistivity of 0.04 Ωcm. This increase in production capacity is not an arithmetic increase with increased power but a geometric production progression.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Panasonic Connect Co., Ltd., 3-1-1 Inazu-cho, Toyonaka City 561-0854, Osaka, Japan.
- University of the Ryukyus, Nishihara 903-0213, Okinawa, Japan.
ORCID-Profile: Mitsuoki Hishida
Zitieren
APA
Hishida, M., Kobata, N., Miyano, K., Nobuoka, M., Okada, T., & Noguchi, T. (2024). Highly Productive Laser Annealing Manufacturing Method Using Continuous Blue WBC (Wavelength Beam Combining) Technique. Materials, 17(22), 5399. https://doi.org/10.3390/ma17225399
Vancouver
Hishida M, Kobata N, Miyano K, Nobuoka M, Okada T, Noguchi T. Highly Productive Laser Annealing Manufacturing Method Using Continuous Blue WBC (Wavelength Beam Combining) Technique. Materials. 2024;17(22):5399. doi:10.3390/ma17225399
BibTeX
@article{Hishida2024,
author = {Hishida, Mitsuoki and Kobata, Naohiko and Miyano, Kentaro and Nobuoka, Masaki and Okada, Tatsuya and Noguchi, Takashi},
title = {Highly Productive Laser Annealing Manufacturing Method Using Continuous Blue WBC (Wavelength Beam Combining) Technique},
journal = {Materials},
year = {2024},
volume = {17},
number = {22},
pages = {5399},
doi = {10.3390/ma17225399}
}
EUVIMED