EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Iron-Based Superconductors for High-Field Applications: Realization of High Engineering Critical Current Density

Peng Yang iD, He Huang, Meng Han, Cong Liu, Chao Yao, Yanwei Ma, Dongliang Wang iD

Materials · 31.10.2024 · 17 (21) · 5306

DOI: 10.3390/ma17215306 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 31.10.2024. Verfasst von Peng Yang und 6 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Applied Superconductivity, Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing 100190, China. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Strategic Priority Research Program of Chinese Academy of Sciences, National Key R&D Program of China, International Partnership Program of Chinese Academy of Sciences.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Iron-based superconductors have strong potential for magnet applications through their very high upper critical field, low anisotropy and manufacturability through the powder-in-tube (PIT) route. The engineering critical current density (Je) is a key parameter for measuring the maximum current density that superconducting materials can withstand in practical applications. It serves as a bridge between theoretical research and practical applications of superconductors and has great significance in promoting the development and application of superconducting technology. In this study, Ag sheathed Ba0.6K0.4Fe2As2 (Ba-122) iron-based superconducting tapes were prepared by using the process of drawing, flat rolling and heat treatment by hot pressing (HP). For the first time, the filling factor of the tapes increased to about 40%, leading to a reduction in the volume fraction of Ag, consequently lowering the overall cost. The optimal parameters for achieving high transport Je were obtained by comparing the effects of different HP pressures on the properties and micro-morphology of the tapes. The prepared mono-filament tapes are capable of carrying the transport Je of 4.1 × 104 A/cm2 (Ic = 350 A) at 4.2 K, 10 T, marking the highest Je reported for Ba-122 wires and tapes to date. Our results show that high transport Je can be obtained in Ba-122 superconducting tapes, and iron-based superconductors have a promising future in practical applications.

Schlagwörter

Stichwörter der Autor:innen

engineering critical current densityiron-based superconductorssuperconducting tapes

Autor:innen und Institutionen

  • Key Laboratory of Applied Superconductivity, Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing 100190, China.
  • University of Chinese Academy of Sciences, Beijing 100049, China.
  • Institute of Electrical Engineering and Advanced Electromagnetic Drive Technology, Qilu Zhongke, Jinan 250013, China.

ORCID-Profile: Peng Yang, Dongliang Wang

Förderung

  • Strategic Priority Research Program of Chinese Academy of Sciences
  • National Key R&D Program of China
  • International Partnership Program of Chinese Academy of Sciences
  • National Natural Science Foundation of China
  • National Key R&D Program of China

Zitieren

APA

Yang, P., Huang, H., Han, M., Liu, C., Yao, C., Ma, Y., & Wang, D. (2024). Iron-Based Superconductors for High-Field Applications: Realization of High Engineering Critical Current Density. Materials, 17(21), 5306. https://doi.org/10.3390/ma17215306

Vancouver

Yang P, Huang H, Han M, Liu C, Yao C, Ma Y, et al. Iron-Based Superconductors for High-Field Applications: Realization of High Engineering Critical Current Density. Materials. 2024;17(21):5306. doi:10.3390/ma17215306

BibTeX
@article{Yang2024,
  author = {Yang, Peng and Huang, He and Han, Meng and Liu, Cong and Yao, Chao and Ma, Yanwei and Wang, Dongliang},
  title = {Iron-Based Superconductors for High-Field Applications: Realization of High Engineering Critical Current Density},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {21},
  pages = {5306},
  doi = {10.3390/ma17215306}
}
Kostenlos starten →