EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

In-Plane Cyclic Mechanical Properties of CF/PEEK/TPU Flexible Composite with Zero Poisson Ratio

Junpeng Gao, Tingting Wang, Hu Xu, Laisheng Han, Baoyan Zhang, Niudong Han, Diantang Zhang

Materials · 31.10.2024 · 17 (21) · 5302

DOI: 10.3390/ma17215302 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 31.10.2024. Verfasst von Junpeng Gao und 6 weiteren Autor:innen. Beteiligte Einrichtung: Composite Technology Center, AVIC Manufacturing Technology Institute, Beijing 100191, China. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National key research and development plan project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper presents the in-plane deformation and cyclic mechanical properties of CF/PEEK (Carbon Fiber-Reinforced Polyetheretherketone)-reinforced TPU (thermoplastic polyurethanes) flexible composites with a zero Poisson ratio. A novel CF/PEEK honeycomb reinforcement with a zero Poisson ratio was fabricated by using 3D-printing technology. Then, TPU was bonded in the two sides of the CF/PEEK honeycomb reinforcement. The in-plane deformation ability and cyclic mechanical properties were evaluated. The results show that the zero Poisson ratio flexible composite can achieve a large in-plane plastic deformation of more than 50% and can better maintain the zero Poisson ratio superstructure. By collecting and comparing the mechanical characteristic values of the CF/PEEK flexible composite under a cyclic load, the CF/PEEK flexible composite MH22-t0.6-CT has the best structural stability. The length of the structure was increased by about 12.53%. By studying the deformation mechanism and failure mechanisms of the flexible composites, the in-plane recyclability of the flexible composites was evaluated, which provides the basic research basis for large-scale in-plane deformation composites.

Schlagwörter

Stichwörter der Autor:innen

cyclic loadflexible compositelarge in-plane deformation mechanismzero Poisson ratio

Autor:innen und Institutionen

  • Composite Technology Center, AVIC Manufacturing Technology Institute, Beijing 100191, China.
  • Key Laboratary of Ecotext, Jiangnan Univsity, Wuxi 214112, China.

Förderung

  • National key research and development plan project

Zitieren

APA

Gao, J., Wang, T., Xu, H., Han, L., Zhang, B., Han, N., & Zhang, D. (2024). In-Plane Cyclic Mechanical Properties of CF/PEEK/TPU Flexible Composite with Zero Poisson Ratio. Materials, 17(21), 5302. https://doi.org/10.3390/ma17215302

Vancouver

Gao J, Wang T, Xu H, Han L, Zhang B, Han N, et al. In-Plane Cyclic Mechanical Properties of CF/PEEK/TPU Flexible Composite with Zero Poisson Ratio. Materials. 2024;17(21):5302. doi:10.3390/ma17215302

BibTeX
@article{Gao2024,
  author = {Gao, Junpeng and Wang, Tingting and Xu, Hu and Han, Laisheng and Zhang, Baoyan and Han, Niudong and Zhang, Diantang},
  title = {In-Plane Cyclic Mechanical Properties of CF/PEEK/TPU Flexible Composite with Zero Poisson Ratio},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {21},
  pages = {5302},
  doi = {10.3390/ma17215302}
}
Kostenlos starten →