Study on the Oxidation Behavior of TiB2-CeO2-Modified (Nb,Mo,Cr,W)Si2 Coating on the Surface of Niobium Alloy
Materials · 28.10.2024 · 17 (21) · 5244
DOI: 10.3390/ma17215244 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 28.10.2024. Verfasst von Xiaojun Zhou und 9 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Central South University, Changsha 410083, China. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the National Key Research and Development Program of China, the National Natural Science Foundation of China, National Key Research and Development Program of China.
Abstract (Originalsprache)
A novel TiB2-CeO2-modified (Nb,Mo,Cr,W)Si2 coating was prepared on a Nb-5W-2Mo-1Zr alloy substrate using two-step slurry sintering and halide-activated pack cementation to address the limitations of a single NbSi2 coating in meeting the service requirements of niobium alloys at elevated temperatures. At 1700 °C, the static oxidation life of the coating exceeded 20 h, thus indicating excellent high-temperature oxidation resistance. This was due to the formation of a TiO2-SiO2-Cr2O3 composite oxide film on the coating surface, which, due to low oxygen permeability, effectively prevented the inward infiltration of oxygen. Additionally, the dense structure of the composite coating further enhanced this protective effect. The composite coating was able to withstand over 1600 thermal shock cycles from room temperature to 1700 °C, and its excellent thermal shock performance could be attributed to the formation of MoSi2, CrSi2, and WSi2 from elements such as Mo, Cr, and W, which were added during modification. In addition to adjusting the difference in thermal expansion coefficients between the layers of composite coatings to reduce the thermal stress generated by thermal shock cycles, the formation of silicide compounds also improved the overall fracture toughness of the coating and thereby improved its thermal shock resistance.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Materials Science and Engineering, Central South University, Changsha 410083, China.
- State Key Laboratory of Special Rare Metal Materials, Northwest Rare Metal Materials Research Institute, Shizuishan 753000, China.
- Powder Metallurgy Research Institute, Central South University, Changsha 410083, China.
- School of Minerals Processing and Bioengineering, Central South University, Changsha 410083, China.
Förderung
- the National Key Research and Development Program of China
- the National Natural Science Foundation of China
- National Key Research and Development Program of China
- National Natural Science Foundation of China
Zitieren
APA
Zhou, X., Xiao, L., Zha, Y., Xu, J., Fang, J., Deng, G., Xu, S., Liu, S., Zhao, X., & Cai, Z. (2024). Study on the Oxidation Behavior of TiB2-CeO2-Modified (Nb,Mo,Cr,W)Si2 Coating on the Surface of Niobium Alloy. Materials, 17(21), 5244. https://doi.org/10.3390/ma17215244
Vancouver
Zhou X, Xiao L, Zha Y, Xu J, Fang J, Deng G, et al. Study on the Oxidation Behavior of TiB2-CeO2-Modified (Nb,Mo,Cr,W)Si2 Coating on the Surface of Niobium Alloy. Materials. 2024;17(21):5244. doi:10.3390/ma17215244
BibTeX
@article{Zhou2024,
author = {Zhou, Xiaojun and Xiao, Lairong and Zha, Yitao and Xu, Jiawei and Fang, Jiashu and Deng, Guanzhi and Xu, Shaofu and Liu, Sainan and Zhao, Xiaojun and Cai, Zhenyang},
title = {Study on the Oxidation Behavior of TiB2-CeO2-Modified (Nb,Mo,Cr,W)Si2 Coating on the Surface of Niobium Alloy},
journal = {Materials},
year = {2024},
volume = {17},
number = {21},
pages = {5244},
doi = {10.3390/ma17215244}
}
EUVIMED