EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Filler Wire Composition on Weld Metal Microstructure and Mechanical Properties in X80 Steel Laser Welds

Hanwen Yang iD, James Chen iD, Xiaoye Zhao iD, Nazmul Huda, Adrian P Gerlich

Materials · 28.10.2024 · 17 (21) · 5235

DOI: 10.3390/ma17215235 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 28.10.2024. Verfasst von Hanwen Yang und 4 weiteren Autor:innen. Beteiligte Einrichtung: Centre for Advanced Materials Joining (CAMJ), Department of Mechanical and Mechatronic Engineering, University of Waterloo, 200 University Avenue Wes…. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Sciences and Engineering Research Council of Canada.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Laser welding was performed using different filler wires, ER70S steel, commercially pure iron, and pure nickel filler, in the context of welding X80 pipeline steel to assess the microstructure and mechanical properties of the weld metal. Introducing an ER70S wire promoted acicular ferrite formation in the fusion zone, compared to a bainitic microstructure in an autogenous laser weld. The use of pure iron wire was considered as a potential strategy for reducing hardenability, as it led to the dilution of alloying elements in the fusion zone, increasing ferrite content and reducing weld metal hardness to a level compliant with API pipeline standards. The addition of pure nickel wire was used to reveal the degree of weld metal mixing imposed by the laser (thus providing an unambiguous tracer element) when it is combined with filler material dilution in the fusion zone, revealing that the upper region contained 38% wire material and the lower region only 12%. This accounts for the differences observed between the upper versus lower portions of the weld metal when other wires are used, and the use of hardness mapping and micro-indentation demonstrates the correlation between the variations in mechanical properties and microstructural differences introduced by incomplete mixing of the filler wire elements.

Schlagwörter

Stichwörter der Autor:innen

lasermicrohardnessmicrostructurepipelinewelding

Autor:innen und Institutionen

  • Centre for Advanced Materials Joining (CAMJ), Department of Mechanical and Mechatronic Engineering, University of Waterloo, 200 University Avenue West, Waterloo, ON N2L 3G1, Canada.
  • CanmetMATERIALS, Natural Resources Canada, 183 Longwood Road South, Hamilton, ON L8P 0A5, Canada.

ORCID-Profile: Hanwen Yang, James Chen, Xiaoye Zhao

Förderung

  • Natural Sciences and Engineering Research Council of Canada

Zitieren

APA

Yang, H., Chen, J., Zhao, X., Huda, N., & Gerlich, A. P. (2024). Effect of Filler Wire Composition on Weld Metal Microstructure and Mechanical Properties in X80 Steel Laser Welds. Materials, 17(21), 5235. https://doi.org/10.3390/ma17215235

Vancouver

Yang H, Chen J, Zhao X, Huda N, Gerlich AP. Effect of Filler Wire Composition on Weld Metal Microstructure and Mechanical Properties in X80 Steel Laser Welds. Materials. 2024;17(21):5235. doi:10.3390/ma17215235

BibTeX
@article{Yang2024,
  author = {Yang, Hanwen and Chen, James and Zhao, Xiaoye and Huda, Nazmul and Gerlich, Adrian P},
  title = {Effect of Filler Wire Composition on Weld Metal Microstructure and Mechanical Properties in X80 Steel Laser Welds},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {21},
  pages = {5235},
  doi = {10.3390/ma17215235}
}
Kostenlos starten →