EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Synthesis and Characterization of Calcium Sulfoaluminate Hydrates—Ettringite (AFt) and Monosulfate (AFm)

Wojciech Szudek iD, Jakub Szydłowski iD, Ilona Buchała, Ewa Kapeluszna iD

Materials · 26.10.2024 · 17 (21) · 5216

DOI: 10.3390/ma17215216 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 26.10.2024. Verfasst von Wojciech Szudek und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Building Materials Technology, Faculty of Materials Science and Ceramics, AGH University of Krakow, Al. Mickiewicza 30, 30-059 Kraków, …. Die Arbeit wurde bisher 41-mal zitiert (Crossref) und nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Center, Polish National Science Centre.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The goal of the presented work was to find the most favorable conditions for the synthesis and stabilization of chemically pure ettringite and monosulfate. The reaction was carried out by mixing pure tricalcium aluminate (C3A) and gypsum (CS¯H2) in an excess amount of water. The impact of hydration time (2–7 days), C3A:CS¯ molar ratio (1:1–1:3) and water vapor pressure of the selected drying agents (anhydrite-III and supersaturated CaCl2 solution) on the phase composition of the products was evaluated. After 7 days of hydration, either ettringite or monosulfate was obtained as the main product, depending on the C3A:CS¯ molar ratio. The synthesis carried out at a C3A:CS¯ molar ratio of 1:3 produced pure ettringite. In the case of the sample characterized by the ratio of 1:1 (typical of monosulfate), a considerable portion of ettringite (27.9%) was present in the final products along the AFm phase. Therefore, a different synthesis method has to be selected in order to obtain pure monosulfate. The results showed that thermal analysis, X-ray diffractometry and FTIR spectroscopy can be used to distinguish the characteristic features of ettringite and monosulfate.

Schlagwörter

Stichwörter der Autor:innen

AFmAFtcalcium sulfoaluminate hydratesettringitemonosulfatesynthesis

Autor:innen und Institutionen

  • Department of Building Materials Technology, Faculty of Materials Science and Ceramics, AGH University of Krakow, Al. Mickiewicza 30, 30-059 Kraków, Poland.

ORCID-Profile: Wojciech Szudek, Jakub Szydłowski, Ewa Kapeluszna

Förderung

  • National Science Center
  • Polish National Science Centre

Zitieren

APA

Szudek, W., Szydłowski, J., Buchała, I., & Kapeluszna, E. (2024). Synthesis and Characterization of Calcium Sulfoaluminate Hydrates—Ettringite (AFt) and Monosulfate (AFm). Materials, 17(21), 5216. https://doi.org/10.3390/ma17215216

Vancouver

Szudek W, Szydłowski J, Buchała I, Kapeluszna E. Synthesis and Characterization of Calcium Sulfoaluminate Hydrates—Ettringite (AFt) and Monosulfate (AFm). Materials. 2024;17(21):5216. doi:10.3390/ma17215216

BibTeX
@article{Szudek2024,
  author = {Szudek, Wojciech and Szydłowski, Jakub and Buchała, Ilona and Kapeluszna, Ewa},
  title = {Synthesis and Characterization of Calcium Sulfoaluminate Hydrates—Ettringite (AFt) and Monosulfate (AFm)},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {21},
  pages = {5216},
  doi = {10.3390/ma17215216}
}
Kostenlos starten →