The Impact of the Final Sintering Temperature on the Microstructure and Dielectric Properties of Ba0.75Ca0.25TiO3 Perovskite Ceramics
Materials · 25.10.2024 · 17 (21) · 5210
DOI: 10.3390/ma17215210 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 25.10.2024. Verfasst von Kamil Feliksik und 6 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Science and Technology, Institute of Materials Engineering, University of Silesia, 75 Pułku Piechoty 1A, 41-500 Chorzow, Poland. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 80 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union.
Abstract (Originalsprache)
Ba0.75Ca0.25TiO3 ceramics were successfully synthesized by a simple solid-state reaction method. This study examined the influence of sintering temperature on the structure, microstructure, dielectric properties and electrical behavior of the material. The XRD analysis reveals that the tetragonal phase (P4mm) is dominant in all the synthesized materials, with those sintered at T = 1400 °C and T = 1450 °C being single-phase, while others exhibit a minor orthorhombic phase (Pbnm). Higher sintering temperatures promoted better grain boundary formation and larger grain sizes. The electric permittivity increased with temperature up to T = 1400 °C, followed by a sharp decline at T = 1450 °C. Additionally, the Curie temperature decreased with increasing sintering temperature, indicating changes in phase transition characteristics. Thermal analysis showed that higher sintering temperatures led to sharper heat capacity peaks, while pyroelectric and thermally stimulated depolarization currents were maximized at T = 1400 °C due to oxygen vacancies. These findings highlight the significant impact of sintering temperature on the material’s structural and functional properties.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Faculty of Science and Technology, Institute of Materials Engineering, University of Silesia, 75 Pułku Piechoty 1A, 41-500 Chorzow, Poland.
- Institute of Electronics and Information Technology, University of Technology, 38A Nadbystrzycka Str., 20-618 Lublin, Poland.
- Department of Construction Materials Engineering and Geoengineering, Lublin University of Technology, 40 Nadbystrzycka Str., 20-618 Lublin, Poland.
ORCID-Profile: Małgorzata Adamczyk-Habrajska, Joanna A Bartkowska, Tomasz Pikula, Rafał Panek, Oliwia Starczewska
Förderung
- European Union
Zitieren
APA
Feliksik, K., Adamczyk-Habrajska, M., Makowska, J., Bartkowska, J. A., Pikula, T., Panek, R., & Starczewska, O. (2024). The Impact of the Final Sintering Temperature on the Microstructure and Dielectric Properties of Ba0.75Ca0.25TiO3 Perovskite Ceramics. Materials, 17(21), 5210. https://doi.org/10.3390/ma17215210
Vancouver
Feliksik K, Adamczyk-Habrajska M, Makowska J, Bartkowska JA, Pikula T, Panek R, et al. The Impact of the Final Sintering Temperature on the Microstructure and Dielectric Properties of Ba0.75Ca0.25TiO3 Perovskite Ceramics. Materials. 2024;17(21):5210. doi:10.3390/ma17215210
BibTeX
@article{Feliksik2024,
author = {Feliksik, Kamil and Adamczyk-Habrajska, Małgorzata and Makowska, Jolanta and Bartkowska, Joanna A and Pikula, Tomasz and Panek, Rafał and Starczewska, Oliwia},
title = {The Impact of the Final Sintering Temperature on the Microstructure and Dielectric Properties of Ba0.75Ca0.25TiO3 Perovskite Ceramics},
journal = {Materials},
year = {2024},
volume = {17},
number = {21},
pages = {5210},
doi = {10.3390/ma17215210}
}
EUVIMED