EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fundamental Study of Phased Array Ultrasonic Cavitation Abrasive Flow Polishing Titanium Alloy Tubes

Yuhan Dai, Sisi Li, Ming Feng, Baiyi Chen, Jiaping Qiao

Materials · 24.10.2024 · 17 (21) · 5185

DOI: 10.3390/ma17215185 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 24.10.2024. Verfasst von Yuhan Dai und 4 weiteren Autor:innen. Beteiligte Einrichtung: College of Mechanical and Electrical Engineering, Wenzhou University, Wenzhou 325035, China. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Major scientific and technological innovation projects of Wenzhou City (CN).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A new method of machining ultrasonic cavitation abrasive flow based on phase control technology was proposed for improving the machining efficiency of the inner wall of TC4 (Ti-6Al-4V) titanium alloy tubes. According to ultrasonic phase control theory and Hertzian contact theory, a model of ultrasonic abrasive material removal rate under phase control technology was established. Using COMSOL Multiphysics 6.1 software, the phase control deflection effect, acoustic field distribution, and the size of the phase control cavitation domain on the inner wall surface were examined at different transducer frequencies and transducer spacings. The results show that the inner wall polishing has the most excellent effect at a transducer frequency of 21 kHz and spacing of 100 mm. In addition, the phased deflection limit was explored under the optimal parameters, and predictive analyses were performed for voltage control under uniform inner wall polishing. Finally, the effect of processing time on polishing was experimented with, and the results showed that the polishing efficiency was highest from 0 to 30 min and stabilized after 60 min. In addition, the change in surface roughness and material removal of the workpiece were analyzed under the control of the voltage applied, and the experimental results corresponded to the voltage prediction analysis results of the simulation, which proved the viability of phase control abrasive flow polishing for the uniformity of material removal of the inner wall of the tube.

Schlagwörter

Stichwörter der Autor:innen

phase controlpolishingtitanium alloy tubeultrasonic abrasive flow

Autor:innen und Institutionen

  • College of Mechanical and Electrical Engineering, Wenzhou University, Wenzhou 325035, China.
  • Rui'an Graduate College, Wenzhou University, Wenzhou 325206, China.
  • Marine Engineering College, Jimei University, Xiamen 361021, China.
  • Shenzhen KiSONICS Technology Co., Ltd., Shenzhen 518107, China.

Förderung

  • National Natural Science Foundation of China
  • Major scientific and technological innovation projects of Wenzhou City (CN)

Zitieren

APA

Dai, Y., Li, S., Feng, M., Chen, B., & Qiao, J. (2024). Fundamental Study of Phased Array Ultrasonic Cavitation Abrasive Flow Polishing Titanium Alloy Tubes. Materials, 17(21), 5185. https://doi.org/10.3390/ma17215185

Vancouver

Dai Y, Li S, Feng M, Chen B, Qiao J. Fundamental Study of Phased Array Ultrasonic Cavitation Abrasive Flow Polishing Titanium Alloy Tubes. Materials. 2024;17(21):5185. doi:10.3390/ma17215185

BibTeX
@article{Dai2024,
  author = {Dai, Yuhan and Li, Sisi and Feng, Ming and Chen, Baiyi and Qiao, Jiaping},
  title = {Fundamental Study of Phased Array Ultrasonic Cavitation Abrasive Flow Polishing Titanium Alloy Tubes},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {21},
  pages = {5185},
  doi = {10.3390/ma17215185}
}
Kostenlos starten →