EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Electrochemical Migration Study on Sn-58Bi Lead-Free Solder Alloy Under Dust Contamination

Fuye Lu, Han Sun, Wenlong Yang, Tianshuo Zhou, Yunpeng Wang, Haoran Ma iD, Haitao Ma iD, Jun Chen

Materials · 24.10.2024 · 17 (21) · 5172

DOI: 10.3390/ma17215172 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 24.10.2024. Verfasst von Fuye Lu und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Dalian University of Technology, Dalian 116000, China. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

With the development of electronic packaging technology toward miniaturization, integration, and high reliability, the diameter and pitch of solder joints continue to shrink. Adjacent solder joints are highly susceptible to electrochemical migration (ECM) due to the synergistic effects of high-density electric fields, water vapor, and contaminants. Dust has become one of the non-negligible causal factors in ECM studies due to air pollution. In this study, 0.2 mM/L NaCl and Na2SO4 solutions were used to simulate soluble salt in dust, and the failure mechanism of an Sn-58Bi solder ECM in the soluble salt in dust was analyzed by a water-droplet experimental method. It was shown that the mean failure time of the ECM of an Sn-58Bi solder in an NaCl solution (53 s) was longer than that in an Na2SO4 solution (32 s) due to the difference in the anodic dissolution characteristics in the two soluble salt solutions. XPS analysis revealed that the dendrites produced by the ECM process were mainly composed of Sn, SnO, and SnO2, and there were precipitation products—Sn(OH)2 and Na2SO4—attached to the dendrites. The corrosion potential in the NaCl solution (−0.351 V) was higher than that in the Na2SO4 solution (−0.360 V), as shown by a polarization test, indicating that the Sn-58Bi solder had better corrosion resistance in the NaCl solution. Therefore, an Sn-58Bi solder has better resistance to electrochemical migration in an NaCl solution compared to an Na2SO4 solution.

Schlagwörter

Stichwörter der Autor:innen

Sn-58Bi soldercorrosiondendriteelectrochemical migration

Autor:innen und Institutionen

  • School of Materials Science and Engineering, Dalian University of Technology, Dalian 116000, China.
  • School of Microelectronics, Dalian University of Technology, Dalian 116024, China.

ORCID-Profile: Haoran Ma, Haitao Ma

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Lu, F., Sun, H., Yang, W., Zhou, T., Wang, Y., Ma, H., Ma, H., & Chen, J. (2024). Electrochemical Migration Study on Sn-58Bi Lead-Free Solder Alloy Under Dust Contamination. Materials, 17(21), 5172. https://doi.org/10.3390/ma17215172

Vancouver

Lu F, Sun H, Yang W, Zhou T, Wang Y, Ma H, et al. Electrochemical Migration Study on Sn-58Bi Lead-Free Solder Alloy Under Dust Contamination. Materials. 2024;17(21):5172. doi:10.3390/ma17215172

BibTeX
@article{Lu2024,
  author = {Lu, Fuye and Sun, Han and Yang, Wenlong and Zhou, Tianshuo and Wang, Yunpeng and Ma, Haoran and Ma, Haitao and Chen, Jun},
  title = {Electrochemical Migration Study on Sn-58Bi Lead-Free Solder Alloy Under Dust Contamination},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {21},
  pages = {5172},
  doi = {10.3390/ma17215172}
}
Kostenlos starten →