Study on Phase Change Materials’ Heat Transfer Characteristics of Medium Temperature Solar Energy Collection System
Materials · 23.10.2024 · 17 (21) · 5159
DOI: 10.3390/ma17215159 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 23.10.2024. Verfasst von Tianqi Wang und 2 weiteren Autor:innen. Beteiligte Einrichtung: National Key Laboratory of Automotive Chassis Integration and Bionics, Changchun 130022, China. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Within the next five years, renewable energy is expected to account for approximately 80% of the new global power generation capacity, with solar power contributing to more than half of this growth. However, the intermittent nature of solar energy remains a significant challenge to fully realizing its potential. Thus, efficient energy storage is crucial for optimizing the effectiveness and dependability of renewable energy. Phase-change materials (PCMs) can play an important role in solar energy storage due to their low cost and high volumetric energy storage density. The low thermal conductivity of PCMs restricts their use for energy storage, despite their immense potential. Hence, the primary goal of this study is to experimentally investigate the energy storage capacity of two blended phase-change materials (paraffin and barium hydroxide octahydrate) through integration with a medium-temperature solar heat collection system. The experimental findings reveal that the blended PCMs possess the highest cumulative charge fraction (0.59), energy capacity, and low energy loss compared to each PCM alone. Furthermore, the phase change storage tank achieves higher heat storage (27%) and exergy storage efficiency (18%) compared to the stored tank water without any PCMs. The blended PCMs enhanced their performance, exhibiting improved interaction and excellent thermal storage properties across a range of temperatures, offering an opportunity for the design of an energy-efficient, low-cost storage system.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- National Key Laboratory of Automotive Chassis Integration and Bionics, Changchun 130022, China.
- College of Automotive Engineering, Jilin University, Changchun 130022, China.
- School of Engineering (Aerospace, Mechanical and Manufacturing), RMIT University, Melbourne, VIC 3000, Australia.
ORCID-Profile: Firoz Alam
Zitieren
APA
Wang, T., Jin, Y., & Alam, F. (2024). Study on Phase Change Materials’ Heat Transfer Characteristics of Medium Temperature Solar Energy Collection System. Materials, 17(21), 5159. https://doi.org/10.3390/ma17215159
Vancouver
Wang T, Jin Y, Alam F. Study on Phase Change Materials’ Heat Transfer Characteristics of Medium Temperature Solar Energy Collection System. Materials. 2024;17(21):5159. doi:10.3390/ma17215159
BibTeX
@article{Wang2024,
author = {Wang, Tianqi and Jin, Yingai and Alam, Firoz},
title = {Study on Phase Change Materials’ Heat Transfer Characteristics of Medium Temperature Solar Energy Collection System},
journal = {Materials},
year = {2024},
volume = {17},
number = {21},
pages = {5159},
doi = {10.3390/ma17215159}
}
EUVIMED