Exploring the Potential of Cold Sintering for Proton-Conducting Ceramics: A Review
Materials · 19.10.2024 · 17 (20) · 5116
DOI: 10.3390/ma17205116 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 19.10.2024. Verfasst von Andrea Bartoletti und 3 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Science, Technology and Sustainability for Ceramics (ISSMC) of the National Research Council (CNR), Via Granarolo 64, I-48018 Faenza, RA…. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 218 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the National Recovery and Resilience Plan (NRRP), the European Union-NextGenerationEU, the European Union—NextGenerationEU.
Abstract (Originalsprache)
Proton-conducting ceramic materials have emerged as effective candidates for improving the performance of solid oxide cells (SOCs) and electrolyzers (SOEs) at intermediate temperatures. BaCeO3 and BaZrO3 perovskites doped with rare-earth elements such as Y2O3 (BCZY) are well known for their high proton conductivity, low operating temperature, and chemical stability, which lead to SOCs’ improved performance. However, the high sintering temperature and extended processing time needed to obtain dense BCZY-type electrolytes (typically > 1350 °C) to be used as SOC electrolytes can cause severe barium evaporation, altering the stoichiometry of the system and consequently reducing the performance of the final device. The cold sintering process (CSP) is a novel sintering technique that allows a drastic reduction in the sintering temperature needed to obtain dense ceramics. Using the CSP, materials can be sintered in a short time using an appropriate amount of a liquid phase at temperatures < 300 °C under a few hundred MPa of uniaxial pressure. For these reasons, cold sintering is considered one of the most promising ways to obtain ceramic proton conductors in mild conditions. This review aims to collect novel insights into the application of the CSP with a focus on BCZY-type materials, highlighting the opportunities and challenges and giving a vision of future trends and perspectives.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute of Science, Technology and Sustainability for Ceramics (ISSMC) of the National Research Council (CNR), Via Granarolo 64, I-48018 Faenza, RA, Italy.
ORCID-Profile: Andrea Bartoletti, Elisa Mercadelli
Förderung
- the National Recovery and Resilience Plan (NRRP)
- the European Union-NextGenerationEU
- the European Union—NextGenerationEU
Zitieren
APA
Bartoletti, A., Mercadelli, E., Gondolini, A., & Sanson, A. (2024). Exploring the Potential of Cold Sintering for Proton-Conducting Ceramics: A Review. Materials, 17(20), 5116. https://doi.org/10.3390/ma17205116
Vancouver
Bartoletti A, Mercadelli E, Gondolini A, Sanson A. Exploring the Potential of Cold Sintering for Proton-Conducting Ceramics: A Review. Materials. 2024;17(20):5116. doi:10.3390/ma17205116
BibTeX
@article{Bartoletti2024,
author = {Bartoletti, Andrea and Mercadelli, Elisa and Gondolini, Angela and Sanson, Alessandra},
title = {Exploring the Potential of Cold Sintering for Proton-Conducting Ceramics: A Review},
journal = {Materials},
year = {2024},
volume = {17},
number = {20},
pages = {5116},
doi = {10.3390/ma17205116}
}
EUVIMED