EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Pt-TiO2 Systems for Enhanced Hydrogen Production from Glycerol: Direct vs Sequential Incorporation Through Photodeposition

Ana M Carozo, Francisco J López-Tenllado iD, M Carmen Herrera-Beurnio iD, Jesús Hidalgo-Carrillo iD, Juan Martín-Gómez iD, Rafael Estevez iD, Alejandro Ariza-Pérez, Francisco J Urbano iD, Alberto Marinas iD

Materials · 19.10.2024 · 17 (20) · 5109

DOI: 10.3390/ma17205109 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 19.10.2024. Verfasst von Ana M Carozo und 8 weiteren Autor:innen. Beteiligte Einrichtung: Departamento de Química Orgánica, Instituto Químico para la Energía y el Medioambiente (IQUEMA), Universidad de Córdoba, E-14071 Córdoba, Spain. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: MCIU/AEI/10.13039/501100011033 and FEDER, UE, MCIU/AEI/10.13039/501100011033 and Unión Europea 'NextGenerationEU/PRTR', Programa FEDER-Andalucía 2021-2027 and Consejería de Universidad, Investigación e Inno-vación de la Junta de Andalucía.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Pt-TiO2 systems are the most widely used photocatalysts in the production of green hydrogen from glycerol photoreforming. To incorporate metals on the surface of materials, photodeposition is the most used method because it employs mild conditions. However, despite its use, there are some parameters that have not been deeply studied, such as the appropriate metal loading and the method itself, to obtain a better dispersion of Pt. In this work, six Pt-TiO2 catalysts were synthesized by a classical photodeposition method employing UV radiation. The studied Pt wt.% range was 0.15–0.60 wt.%, being incorporated in one step or in subsequent ones. HRTEM analyses showed that both methods allowed a homogeneous distribution of Pt, and in both, the particle size was around 2.3–3.6 nm, increasing with metal loading. The photocatalytic activity of materials was tested in glycerol photoreforming under UV radiation, and the 0.45 wt.% Pt-containing solid that had been synthesized in one step was the one that allowed the highest hydrogen production. This might suggest that around 0.40% is the appropriate metal loading for hydrogen production under these conditions and that incorporating the desired metal percentage in one step is the most efficient method in terms of energy and time savings.

Schlagwörter

Stichwörter der Autor:innen

TiO2glycerol photoreforminghydrogen productionmetal loadingphotocatalysisphotodeposition

Autor:innen und Institutionen

  • Departamento de Química Orgánica, Instituto Químico para la Energía y el Medioambiente (IQUEMA), Universidad de Córdoba, E-14071 Córdoba, Spain.

ORCID-Profile: Francisco J López-Tenllado, M Carmen Herrera-Beurnio, Jesús Hidalgo-Carrillo, Juan Martín-Gómez, Rafael Estevez, Francisco J Urbano, Alberto Marinas

Förderung

  • MCIU/AEI/10.13039/501100011033 and FEDER, UE
  • MCIU/AEI/10.13039/501100011033 and Unión Europea 'NextGenerationEU/PRTR'
  • Programa FEDER-Andalucía 2021-2027 and Consejería de Universidad, Investigación e Inno-vación de la Junta de Andalucía
  • FEDER
  • Unión Europea ‘NextGenerationEU/PRTR’
  • Programa FEDER-Andalucía 2021–2027
  • Consejería de Universidad, Investigación e Innovación de la Junta de Andalucía

Zitieren

APA

Carozo, A. M., López-Tenllado, F. J., Herrera-Beurnio, M. C., Hidalgo-Carrillo, J., Martín-Gómez, J., Estevez, R., Ariza-Pérez, A., Urbano, F. J., & Marinas, A. (2024). Pt-TiO2 Systems for Enhanced Hydrogen Production from Glycerol: Direct vs Sequential Incorporation Through Photodeposition. Materials, 17(20), 5109. https://doi.org/10.3390/ma17205109

Vancouver

Carozo AM, López-Tenllado FJ, Herrera-Beurnio MC, Hidalgo-Carrillo J, Martín-Gómez J, Estevez R, et al. Pt-TiO2 Systems for Enhanced Hydrogen Production from Glycerol: Direct vs Sequential Incorporation Through Photodeposition. Materials. 2024;17(20):5109. doi:10.3390/ma17205109

BibTeX
@article{Carozo2024,
  author = {Carozo, Ana M and López-Tenllado, Francisco J and Herrera-Beurnio, M Carmen and Hidalgo-Carrillo, Jesús and Martín-Gómez, Juan and Estevez, Rafael and Ariza-Pérez, Alejandro and Urbano, Francisco J and Marinas, Alberto},
  title = {Pt-TiO2 Systems for Enhanced Hydrogen Production from Glycerol: Direct vs Sequential Incorporation Through Photodeposition},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {20},
  pages = {5109},
  doi = {10.3390/ma17205109}
}
Kostenlos starten →