EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of the Traverse Speed of the Stylus Tip on Changes in the Areal Texture Parameters of Machined Surfaces

Pawel Pawlus, Rafal Reizer iD, Wiesław Żelasko

Materials · 16.10.2024 · 17 (20) · 5052

DOI: 10.3390/ma17205052 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 16.10.2024. Verfasst von Pawel Pawlus und 2 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Mechanical Engineering and Aeronautics, Rzeszow University of Technology, Powstancow Warszawy 8 Street, 35-959 Rzeszow, Poland. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Measurements of areal (3D) surface texture using optical methods are very popular because of the short measurement time compared to the stylus tip technique. However, they are very sensitive to measurement errors. In some cases, optical measurements are not recommended. The stylus measurement method is well known and can be the reference technique for surface texture measurement. The main disadvantage is the long measuring time. This time can be shortened using higher speeds of measurement. The effect of the speed of the measurement of stylus profilometer on changes in surface texture parameters was studied. Fifty surface topographies were measured using the stylus profilometer at speeds 0.5, 1, 2, 3, 4, and 5 mm/s in the same places. Surfaces after lapping, polishing, grinding, milling, laser texturing, and two-process random surfaces were measured and analyzed. Changes in parameters caused by the increase in the traverse speed depend on the characteristics and parameters of the surfaces. The random surfaces changed more than the deterministic ones. The increase in the traverse speed from 0.5 to 1 mm/s caused small changes in the parameters.

Schlagwörter

Stichwörter der Autor:innen

stylus flightsurface texture parameterstraverse speed

Autor:innen und Institutionen

  • Faculty of Mechanical Engineering and Aeronautics, Rzeszow University of Technology, Powstancow Warszawy 8 Street, 35-959 Rzeszow, Poland.
  • Institute of Materials Engineering, College of Natural Sciences, University of Rzeszow, Pigonia Street 1, 35-310 Rzeszow, Poland.
  • Faculty of Mechanics and Technology, Rzeszow University of Technology, Kwiatkowskiego Street 4, 37-450 Stalowa Wola, Poland.

ORCID-Profile: Rafal Reizer

Zitieren

APA

Pawlus, P., Reizer, R., & Żelasko, W. (2024). Influence of the Traverse Speed of the Stylus Tip on Changes in the Areal Texture Parameters of Machined Surfaces. Materials, 17(20), 5052. https://doi.org/10.3390/ma17205052

Vancouver

Pawlus P, Reizer R, Żelasko W. Influence of the Traverse Speed of the Stylus Tip on Changes in the Areal Texture Parameters of Machined Surfaces. Materials. 2024;17(20):5052. doi:10.3390/ma17205052

BibTeX
@article{Pawlus2024,
  author = {Pawlus, Pawel and Reizer, Rafal and Żelasko, Wiesław},
  title = {Influence of the Traverse Speed of the Stylus Tip on Changes in the Areal Texture Parameters of Machined Surfaces},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {20},
  pages = {5052},
  doi = {10.3390/ma17205052}
}
Kostenlos starten →