EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Testing Mortars for 3D Printing: Correlation with Rheological Behavior

Ta Minh Phuong Bao, Muy Yeakleang, Sandra Abdelouhab iD, Luc Courard iD

Materials · 12.10.2024 · 17 (20) · 5002

DOI: 10.3390/ma17205002 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 12.10.2024. Verfasst von Ta Minh Phuong Bao und 3 weiteren Autor:innen. Beteiligte Einrichtung: Urban and Environmental Engineering, Building Materials, University of Liège, 4000 Liège, Belgium. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Win4Collective program (Wallonia), Regional Government of Wallonia (Belgium) through BEXTRUS (Impression 3D de Béton par EXTRUSion) research project (2022–2024).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Three-dimensionally printed concrete is a transformative technology that addresses housing shortages due to population growth and enables innovative architectural designs. The objective of this study is to investigate the connection between a conventional test and the rheological properties of 3D-printed concrete. A more precise assessment of material quality based on traditional evaluation techniques is proposed. Standard tests are conducted to evaluate the consistency of 3D-printed concrete materials. Complementarily, a rheometer is employed to accurately measure key rheological properties, thereby establishing a link with empiric testing methodologies. The correlation between the flow table test and rheological coefficients, such as yield stress and viscosity, has been identified as the most effective in basic experiments for evaluating material behavior. This approach allows for a preliminary assessment of printability without the need for additional complex equipment. The study has successfully established a relationship between flow table tests and rheological parameters. However, further research involving a broader range of materials and print-test experiments is essential to enhance the correlation between other conventional testing methods and rheometer results.

Schlagwörter

Stichwörter der Autor:innen

3D printing concreteconsistencymortarsrheology measurementsshear levelshear stressviscosity

Autor:innen und Institutionen

  • Urban and Environmental Engineering, Building Materials, University of Liège, 4000 Liège, Belgium.
  • Belgian Ceramic Research Center, 7000 Mons, Belgium.

ORCID-Profile: Sandra Abdelouhab, Luc Courard

Förderung

  • Win4Collective program (Wallonia)
  • Regional Government of Wallonia (Belgium) through BEXTRUS (Impression 3D de Béton par EXTRUSion) research project (2022–2024)

Zitieren

APA

Bao, T. M. P., Yeakleang, M., Abdelouhab, S., & Courard, L. (2024). Testing Mortars for 3D Printing: Correlation with Rheological Behavior. Materials, 17(20), 5002. https://doi.org/10.3390/ma17205002

Vancouver

Bao TMP, Yeakleang M, Abdelouhab S, Courard L. Testing Mortars for 3D Printing: Correlation with Rheological Behavior. Materials. 2024;17(20):5002. doi:10.3390/ma17205002

BibTeX
@article{Bao2024,
  author = {Bao, Ta Minh Phuong and Yeakleang, Muy and Abdelouhab, Sandra and Courard, Luc},
  title = {Testing Mortars for 3D Printing: Correlation with Rheological Behavior},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {20},
  pages = {5002},
  doi = {10.3390/ma17205002}
}
Kostenlos starten →