EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Evolution of Dilatant Shear Bands in High-Pressure Die Casting for Al-Si Alloys

Jingzhou Lu, Ewan Lordan, Yijie Zhang, Zhongyun Fan iD, Wanlin Wang, Kun Dou iD

Materials · 12.10.2024 · 17 (20) · 5001

DOI: 10.3390/ma17205001 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 12.10.2024. Verfasst von Jingzhou Lu und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Metallurgy and Environment, Central South University, Changsha 410083, China. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Foundation of China, the Open foundation of the State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, China, the Key Research and Development Program of Xiangjiang Laboratory.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Bands of interdendritic porosity and positive macrosegregation are commonly observed in pressure die castings, with previous studies demonstrating their close relation to dilatant shear bands in granular materials. Despite recent technological developments, the micromechanism governing dilatancy in the high-pressure die casting (HPDC) process for alloys between liquid and solid temperature regions is still not fully understood. To investigate the influence of fluid flow and the size of externally solidified crystals (ESCs) on the evolution of dilatant shear bands in HPDC, various filling velocities were trialled to produce HPDC samples of Al8SiMnMg alloys. This study demonstrates that crystal fragmentation is accompanied by a decrease in dilatational concentration, producing an indistinct shear band. Once crystal fragmentation stagnates, the enhanced deformation rate associated with a further increase in filling velocity (from 2.2 ms−1 to 4.6 ms−1) localizes dilatancy into a highly concentrated shear band. The optimal piston velocity is 3.6 ms−1, under which the average ESC size reaches the minimum, and the average yield stress and overall product of strength and elongation reach the maximum values of 144.6 MPa and 3.664 GPa%, respectively. By adopting the concept of force chain buckling in granular media, the evolution of dilatant shear bands in equiaxed solidifying alloys can be adequately explained based on further verification with DEM-type modeling in OpenFOAM. Three mechanisms for ESC-enhanced dilation are presented, elucidating previous reports relating the presence of ESCs to the subsequent shear band characteristics. By applying the physics of granular materials to equiaxed solidifying alloys, unique opportunities are presented for process optimization and microstructural modeling in HPDC.

Schlagwörter

Stichwörter der Autor:innen

aluminium alloysdefectshigh-pressure die castingsegregationshear bands

Autor:innen und Institutionen

  • School of Metallurgy and Environment, Central South University, Changsha 410083, China.
  • Brunel Centre for Advanced Solidification Technology (BCAST), Brunel University London, Kingston Lane, Uxbridge UB8 3PH, UK.

ORCID-Profile: Zhongyun Fan, Kun Dou

Förderung

  • National Science Foundation of China
  • the Open foundation of the State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, China
  • the Key Research and Development Program of Xiangjiang Laboratory
  • Engineering and Physical Sciences Research Council (EPSRC) and Jaguar Land Rover Ltd.

Zitieren

APA

Lu, J., Lordan, E., Zhang, Y., Fan, Z., Wang, W., & Dou, K. (2024). The Evolution of Dilatant Shear Bands in High-Pressure Die Casting for Al-Si Alloys. Materials, 17(20), 5001. https://doi.org/10.3390/ma17205001

Vancouver

Lu J, Lordan E, Zhang Y, Fan Z, Wang W, Dou K. The Evolution of Dilatant Shear Bands in High-Pressure Die Casting for Al-Si Alloys. Materials. 2024;17(20):5001. doi:10.3390/ma17205001

BibTeX
@article{Lu2024,
  author = {Lu, Jingzhou and Lordan, Ewan and Zhang, Yijie and Fan, Zhongyun and Wang, Wanlin and Dou, Kun},
  title = {The Evolution of Dilatant Shear Bands in High-Pressure Die Casting for Al-Si Alloys},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {20},
  pages = {5001},
  doi = {10.3390/ma17205001}
}
Kostenlos starten →