EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Annealing and Aging Parameters on the Microstructure and Properties of 1200 MPa Grade Cold-Rolled Dual-Phase Steel

Xiaoyue Ma, Xiaohong Chu, Yuebiao Yang, Hongzhou Lu, Wenjun Wang, Zhengzhi Zhao iD

Materials · 09.10.2024 · 17 (19) · 4933

DOI: 10.3390/ma17194933 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 09.10.2024. Verfasst von Xiaoyue Ma und 5 weiteren Autor:innen. Beteiligte Einrichtung: Collaborative Innovation Center of Steel Technology, University of Science and Technology Beijing, Beijing 100083, China. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Hongzhou Lu, Wenjun Wang, Major Scientific and Technological Innovation Project of CITIC Group, Fundamental Research Funds for the Central Universities.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

With the rapid development of the automotive industry, the requirements for bodywork materials are not only focused on high strength but also on improved forming properties. To develop a new generation of automotive steels with higher strength–plasticity matching, a high elongation 1200 MPa grade V-Nb microalloyed cold-rolled reinforced formable dual-phase steel was developed in this experiment through rational compositional design and precise process machining. The properties of the test steel are improved by varying the over-aging temperature as well as the annealing temperature to achieve a good strength–plasticity balance. The results show that as the aging temperature increases, the tensile strength and yield strength of the test steel decrease, while the elongation continues to increase. At an aging temperature of 310 °C, the steel exhibits not only high strength but also better ductility. As the annealing temperature increases, the tensile strength and yield strength of the test steel initially increase and then decrease, while the elongation continues to increase. When the heat treatment process involves an annealing temperature of 860 °C and an over-aging temperature of 310 °C, the test steel achieves the best strength–plasticity balance.

Schlagwörter

Stichwörter der Autor:innen

annealing temperaturecold-rolled dual-phase steels with high formabilityfracture behaviormicroalloyingover-aging temperature

Autor:innen und Institutionen

  • Collaborative Innovation Center of Steel Technology, University of Science and Technology Beijing, Beijing 100083, China.
  • Beijing Engineering Technology Research Center of Special Steel for Traffic and Energy, University of Science and Technology Beijing, Beijing 100083, China.
  • Guangxi Liuzhou Iron and Steel Group Co., Ltd., Liuzhou 545002, China.
  • CITIC Metal Co., Ltd., Beijing 100004, China.

ORCID-Profile: Zhengzhi Zhao

Förderung

  • Hongzhou Lu, Wenjun Wang
  • Major Scientific and Technological Innovation Project of CITIC Group
  • Fundamental Research Funds for the Central Universities

Zitieren

APA

Ma, X., Chu, X., Yang, Y., Lu, H., Wang, W., & Zhao, Z. (2024). Influence of Annealing and Aging Parameters on the Microstructure and Properties of 1200 MPa Grade Cold-Rolled Dual-Phase Steel. Materials, 17(19), 4933. https://doi.org/10.3390/ma17194933

Vancouver

Ma X, Chu X, Yang Y, Lu H, Wang W, Zhao Z. Influence of Annealing and Aging Parameters on the Microstructure and Properties of 1200 MPa Grade Cold-Rolled Dual-Phase Steel. Materials. 2024;17(19):4933. doi:10.3390/ma17194933

BibTeX
@article{Ma2024,
  author = {Ma, Xiaoyue and Chu, Xiaohong and Yang, Yuebiao and Lu, Hongzhou and Wang, Wenjun and Zhao, Zhengzhi},
  title = {Influence of Annealing and Aging Parameters on the Microstructure and Properties of 1200 MPa Grade Cold-Rolled Dual-Phase Steel},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {19},
  pages = {4933},
  doi = {10.3390/ma17194933}
}
Kostenlos starten →