Effect of Cryogenic Treatment on Residual Stress and Microstructure of 6061 Aluminum Alloy and Optimization of Parameters
Materials · 04.10.2024 · 17 (19) · 4873
DOI: 10.3390/ma17194873 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 04.10.2024. Verfasst von Xuemei Niu und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Taiyuan Science and Technology University, Taiyuan 030024, China. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundamental Research Program of Shanxi Province, Key Research and Development Project of Shanxi Province, Innovation Project of Taiyuan University of Science and Technology.
Abstract (Originalsprache)
Residual stress induced by solution treatment in 6061 aluminum alloy can lead to workpiece deformation, or even premature failure. The efficiency of traditional heat treatment for relieving residual stress is relatively low. Therefore, this study introduces a novel cryogenic treatment technique to reduce residual stress. The optimal cryogenic process parameters were achieved by orthogonal experiments: cryogenic temperature of 113 K, holding time of 24 h, 1 cryogenic cycle, and a cooling rate of 3 K·min−1, and the residual stress of aluminum alloy was measured by the blind hole method. The microstructural evolutions in 6061 aluminum alloy were tested by OM, SEM, and TEM. The results show that the introduction of cryogenic treatment can reduce residual stress in 6061 aluminum alloy by 64%, mainly due to the reduction of dislocations and the uniform distribution of β’’ phase.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Mechanical Engineering, Taiyuan Science and Technology University, Taiyuan 030024, China.
Förderung
- Fundamental Research Program of Shanxi Province
- Key Research and Development Project of Shanxi Province
- Innovation Project of Taiyuan University of Science and Technology
- Pre-research Project Fund of Taiyuan University of Science and Technology
Zitieren
APA
Niu, X., Chen, Z., Jing, L., Huang, Y., & Liu, Y. (2024). Effect of Cryogenic Treatment on Residual Stress and Microstructure of 6061 Aluminum Alloy and Optimization of Parameters. Materials, 17(19), 4873. https://doi.org/10.3390/ma17194873
Vancouver
Niu X, Chen Z, Jing L, Huang Y, Liu Y. Effect of Cryogenic Treatment on Residual Stress and Microstructure of 6061 Aluminum Alloy and Optimization of Parameters. Materials. 2024;17(19):4873. doi:10.3390/ma17194873
BibTeX
@article{Niu2024,
author = {Niu, Xuemei and Chen, Zhi and Jing, Linwang and Huang, Yao and Liu, Yuhang},
title = {Effect of Cryogenic Treatment on Residual Stress and Microstructure of 6061 Aluminum Alloy and Optimization of Parameters},
journal = {Materials},
year = {2024},
volume = {17},
number = {19},
pages = {4873},
doi = {10.3390/ma17194873}
}
EUVIMED