EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Calibration of Discrete Element Method Parameters for a High-Fidelity Lunar Regolith Simulant Considering the Effects of Realistic Particle Shape

Ningxi Zhou, Jian Chen, Ning Tian iD, Kaiwei Tian, Juehao Huang, Peng Wu

Materials · 29.09.2024 · 17 (19) · 4789

DOI: 10.3390/ma17194789 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 29.09.2024. Verfasst von Ningxi Zhou und 5 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Geomechanics and Geotechnical Engineering, Institute of Rock and Soil Mechanics, Chinese Academy of Sciences, Wuhan 430071, C…. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the National Key Research and Development Program of China, National Key Research and Development Program of China, National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The Discrete Element Method (DEM) is an important tool for investigating the geotechnical properties of lunar regolith. The accuracy of DEM simulations largely depends on precise particle modeling and the appropriate selection of mesoscopic parameters. To enhance the reliability and accuracy of the DEM in lunar regolith studies, this paper utilized the high-fidelity IRSM-1 lunar regolith simulant to construct a DEM model with realistic particle shapes and conducted an angle of repose (AoR) simulation test. The optimal DEM parameters were calibrated using a combination of the Plackett–Burman test, steepest ascent test, and Box–Behnken design. The results indicate that the sliding friction coefficient, rolling friction coefficient, and surface energy significantly influence the simulation AoR. By optimizing against the measured AoR using a second-order regression model, the optimal parameter values were determined to be 0.633, 0.401, and 0.2, respectively. Under these optimal parameters, the error between the simulation and experimental AoR was 2.1%. Finally, the calibrated mesoscopic parameters were validated through a lifting cylinder test, showing an error of 6.3% between the simulation and experimental results. The high similarity in the shape of the AoR further confirms the accuracy and reliability of the parameter calibration method. This study provides a valuable reference for future DEM-based research on the mechanical and engineering properties of lunar regolith.

Schlagwörter

Stichwörter der Autor:innen

angle of reposediscrete element methodlunar regolith simulantparameter calibrationparticle shape

Autor:innen und Institutionen

  • State Key Laboratory of Geomechanics and Geotechnical Engineering, Institute of Rock and Soil Mechanics, Chinese Academy of Sciences, Wuhan 430071, China.
  • University of Chinese Academy of Sciences, Beijing 100049, China.
  • Hubei Key Laboratory of Geo-Environmental Engineering, Wuhan 430071, China.
  • China-Pakistan Joint Research Center on Earth Sciences, Islamabad 45320, Pakistan.

ORCID-Profile: Ning Tian

Förderung

  • the National Key Research and Development Program of China
  • National Key Research and Development Program of China
  • National Natural Science Foundation of China

Zitieren

APA

Zhou, N., Chen, J., Tian, N., Tian, K., Huang, J., & Wu, P. (2024). Calibration of Discrete Element Method Parameters for a High-Fidelity Lunar Regolith Simulant Considering the Effects of Realistic Particle Shape. Materials, 17(19), 4789. https://doi.org/10.3390/ma17194789

Vancouver

Zhou N, Chen J, Tian N, Tian K, Huang J, Wu P. Calibration of Discrete Element Method Parameters for a High-Fidelity Lunar Regolith Simulant Considering the Effects of Realistic Particle Shape. Materials. 2024;17(19):4789. doi:10.3390/ma17194789

BibTeX
@article{Zhou2024,
  author = {Zhou, Ningxi and Chen, Jian and Tian, Ning and Tian, Kaiwei and Huang, Juehao and Wu, Peng},
  title = {Calibration of Discrete Element Method Parameters for a High-Fidelity Lunar Regolith Simulant Considering the Effects of Realistic Particle Shape},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {19},
  pages = {4789},
  doi = {10.3390/ma17194789}
}
Kostenlos starten →