Toward Stabilizing the Keyhole in Laser Spot Welding of Aluminum: Numerical Analysis
Materials · 27.09.2024 · 17 (19) · 4741
DOI: 10.3390/ma17194741 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 27.09.2024. Verfasst von Saeid SaediArdahaei und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, École de Technologie Supérieure, 1100, Notre-Dame Ouest Street, Montreal, QC H3C 1K3, Canada. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Sciences and Engineering Research Council of Canada (NSERC), Fonds du recherche du Quebec (FRQ), Science, Nature, and Technologies (FRQNT), Fonds de recherche du Québec, Nature et Technologies (FRQNT).
Abstract (Originalsprache)
The inherent instability of laser welding, particularly keyhole instability, poses significant challenges in industrial applications, leading to defects such as porosities that compromise weld quality. Various forces act on the keyhole and molten pool during laser welding, influencing process stability. These forces are categorized into those promoting keyhole opening and penetration (e.g., recoil pressure) and those promoting keyhole collapse (e.g., surface tension, Darcy’s damping forces), increasing instability and defect likelihood. This paper provides a comprehensive instability analysis to uncover key factors affecting keyhole and process instability, presenting future avenues for improving laser welding stability. Using a novel numerical method for simulating laser spot welding on aluminum with COMSOL Multiphysics 5.6, we investigated the effect of laser pulse shaping on keyhole and process instability. Our analysis focused on keyhole morphology, fluid flow behaviour, and force analysis. The results indicated that the curvature effect, Marangoni effect, and Darcy’s damping force are primary contributors to instability, with the curvature effect and Darcy’s damping force being the most dominant. Additionally, erratic and high-velocity magnitudes induce intense fluid flow behaviour, exacerbating keyhole instability. Moreover, single/quadruple peak triangular and variant rectangular ramp-down pulse shapes produced the least instability, while multi-pulse rectangular shapes exhibited intense instability. It was found that combining triangular/rectangular pulse shapes can reduce force and keyhole instability by smoothing spontaneous force spikes, resulting in a more stabilized welding process. Controlling fluid flow and abrupt force changes with appropriate pulse shaping is key to defect-free welded products.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Mechanical Engineering, École de Technologie Supérieure, 1100, Notre-Dame Ouest Street, Montreal, QC H3C 1K3, Canada.
ORCID-Profile: Saeid SaediArdahaei, Xuan-Tan Pham
Förderung
- Natural Sciences and Engineering Research Council of Canada (NSERC)
- Fonds du recherche du Quebec (FRQ), Science, Nature, and Technologies (FRQNT)
- Fonds de recherche du Québec, Nature et Technologies (FRQNT)
Zitieren
APA
SaediArdahaei, S., & Pham, X. T. (2024). Toward Stabilizing the Keyhole in Laser Spot Welding of Aluminum: Numerical Analysis. Materials, 17(19), 4741. https://doi.org/10.3390/ma17194741
Vancouver
SaediArdahaei S, Pham XT. Toward Stabilizing the Keyhole in Laser Spot Welding of Aluminum: Numerical Analysis. Materials. 2024;17(19):4741. doi:10.3390/ma17194741
BibTeX
@article{SaediArdahaei2024,
author = {SaediArdahaei, Saeid and Pham, Xuan-Tan},
title = {Toward Stabilizing the Keyhole in Laser Spot Welding of Aluminum: Numerical Analysis},
journal = {Materials},
year = {2024},
volume = {17},
number = {19},
pages = {4741},
doi = {10.3390/ma17194741}
}
EUVIMED