Mechanical Properties and Chloride Penetration Resistance of Concrete Combined with Ground Granulate Blast Furnace Slag and Macro Synthetic Fiber
Materials · 26.09.2024 · 17 (19) · 4735
DOI: 10.3390/ma17194735 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 26.09.2024. Verfasst von Shengzhao Cheng und 5 weiteren Autor:innen. Beteiligte Einrichtung: China Construction Seventh Engineering Division Corp., Ltd., Zhengzhou 450002, China. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the China Construction Seventh Engineering Division Corp. Ltd, the Natural Science Foundation of Henan Province, the China National Natural Science Foundation Youth Fund Project.
Abstract (Originalsprache)
Concrete with good mechanical properties and durability has always been a necessity in engineering. The addition of fibers and supplementary cementitious materials to concrete can enhance its mechanical and durability performance through a series of chemical and physical interactions. This study aims to investigate the effects of key parameters on the compressive strength, splitting tensile strength, and chloride penetration resistance of concrete combined with ground granulate blast furnace slag (GGBS) and macro polypropylene synthetic fiber (MSF). Based on the Taguchi method, a total of eighteen mixtures were evaluated, considering the effects of GGBS content, MSF content, water-to-binder (w/b) ratio, and chloride solution concentration on concrete properties. The results showed that the w/b ratio has a significant impact on the properties of concrete, which are enhanced by a decrease in w/b ratio. The GGBS content had little effect on the 28-day strength of concrete, which even decreased with a large GGBS content, but GGBS had a positive effect on the long-term strength of concrete. Moreover, the chloride penetration resistance of concrete was enhanced by an increase in the GGBS content. The MSF content had no obvious effects on the compressive strength and chloride penetration resistance of concrete, but it could enhance the splitting tensile strength to some extent, and this enhancement was more obvious over time. The chloride diffusion coefficient of concrete changed with the concentration of chloride solution, and the two increased simultaneously.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- China Construction Seventh Engineering Division Corp., Ltd., Zhengzhou 450002, China.
- Yellow River Institute of Hydraulic Research, Zhengzhou 450003, China.
- Henan Academy of Sciences, Zhengzhou 450046, China.
- College of Civil Engineering, Henan University of Engineering, Zhengzhou 451191, China.
- Department of Civil and Transportation Engineering, Henan University of Urban Construction, Pingdingshan 467036, China.
ORCID-Profile: Haitang Zhu
Förderung
- the China Construction Seventh Engineering Division Corp. Ltd
- the Natural Science Foundation of Henan Province
- the China National Natural Science Foundation Youth Fund Project
- China Construction Seventh Engineering Division Corp., Ltd.
- Natural Science Foundation of Henan Province
- China National Natural Science Foundation Youth Fund Project
Zitieren
APA
Cheng, S., Shen, L., Chen, W., Zhu, H., You, P., & Chen, L. (2024). Mechanical Properties and Chloride Penetration Resistance of Concrete Combined with Ground Granulate Blast Furnace Slag and Macro Synthetic Fiber. Materials, 17(19), 4735. https://doi.org/10.3390/ma17194735
Vancouver
Cheng S, Shen L, Chen W, Zhu H, You P, Chen L. Mechanical Properties and Chloride Penetration Resistance of Concrete Combined with Ground Granulate Blast Furnace Slag and Macro Synthetic Fiber. Materials. 2024;17(19):4735. doi:10.3390/ma17194735
BibTeX
@article{Cheng2024,
author = {Cheng, Shengzhao and Shen, Lisha and Chen, Weige and Zhu, Haitang and You, Peibo and Chen, Lu},
title = {Mechanical Properties and Chloride Penetration Resistance of Concrete Combined with Ground Granulate Blast Furnace Slag and Macro Synthetic Fiber},
journal = {Materials},
year = {2024},
volume = {17},
number = {19},
pages = {4735},
doi = {10.3390/ma17194735}
}
EUVIMED