EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Functionally Graded Materials and Structures: Unified Approach by Optimal Design, Metal Additive Manufacturing, and Image-Based Characterization

Rui F Silva iD, Pedro G Coelho iD, Carolina V Gustavo, Cláudia J Almeida, Francisco Werley Cipriano Farias, Valdemar R Duarte iD, José Xavier iD, Marcos B Esteves iD, Fábio M Conde, Filipa G Cunha iD, Telmo G Santos iD

Materials · 16.09.2024 · 17 (18) · 4545

DOI: 10.3390/ma17184545 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 16.09.2024. Verfasst von Rui F Silva und 10 weiteren Autor:innen. Beteiligte Einrichtung: UNIDEMI, Department of Mechanical and Industrial Engineering, NOVA School of Science and Technology, Universidade NOVA de Lisboa, 2829-516 Caparica, …. Die Arbeit wurde bisher 32-mal zitiert (Crossref) und nennt 106 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundação para a Ciência e Tecnologia, Fundação para a Ciência e a Tecnologia (FCT–MCTES), IDMEC, under LAETA.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Functionally Graded Materials (FGMs) can outperform their homogeneous counterparts. Advances in digitalization technologies, mainly additive manufacturing, have enabled the synthesis of materials with tailored properties and functionalities. Joining dissimilar metals to attain compositional grading is a relatively unexplored research area and holds great promise for engineering applications. Metallurgical challenges may arise; thus, a theoretical critical analysis is presented in this paper. A multidisciplinary methodology is proposed here to unify optimal design, multi-feed Wire-Arc Additive Manufacturing (WAAM), and image-based characterization methods to create structure-specific oriented FGM parts. Topology optimization is used to design FGMs. A beam under pure bending is used to explore the layer-wise FGM concept, which is also analytically validated. The challenges, limitations, and role of WAAM in creating FGM parts are discussed, along with the importance of numerical validation using full-field deformation data. As a result, a conceptual FGM engineering workflow is proposed at this stage, enabling digital data conversion regarding geometry and compositional grading. This is a step forward in processing in silico data, with a view to experimentally producing parts in future. An optimized FGM beam, revealing an optimal layout and a property gradient from iron to copper along the build direction (bottom–up) that significantly reduces the normal pure bending stresses (by 26%), is used as a case study to validate the proposed digital workflow.

Schlagwörter

Stichwörter der Autor:innen

Functionally Graded MaterialsWire-Arc Additive Manufacturingadditive manufacturingmetalstopology optimization

Autor:innen und Institutionen

  • UNIDEMI, Department of Mechanical and Industrial Engineering, NOVA School of Science and Technology, Universidade NOVA de Lisboa, 2829-516 Caparica, Portugal.
  • IDMEC, Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais 1, 1049-001 Lisbon, Portugal.
  • Intelligent Systems Associate Laboratory, LASI, 4800-058 Guimarães, Portugal.

ORCID-Profile: Rui F Silva, Pedro G Coelho, Valdemar R Duarte, José Xavier, Marcos B Esteves, Filipa G Cunha, Telmo G Santos

Förderung

  • Fundação para a Ciência e Tecnologia
  • Fundação para a Ciência e a Tecnologia (FCT–MCTES)
  • IDMEC, under LAETA
  • PhD studentships

Zitieren

APA

Silva, R. F., Coelho, P. G., Gustavo, C. V., Almeida, C. J., Farias, F. W. C., Duarte, V. R., Xavier, J., Esteves, M. B., Conde, F. M., Cunha, F. G., & Santos, T. G. (2024). Functionally Graded Materials and Structures: Unified Approach by Optimal Design, Metal Additive Manufacturing, and Image-Based Characterization. Materials, 17(18), 4545. https://doi.org/10.3390/ma17184545

Vancouver

Silva RF, Coelho PG, Gustavo CV, Almeida CJ, Farias FWC, Duarte VR, et al. Functionally Graded Materials and Structures: Unified Approach by Optimal Design, Metal Additive Manufacturing, and Image-Based Characterization. Materials. 2024;17(18):4545. doi:10.3390/ma17184545

BibTeX
@article{Silva2024,
  author = {Silva, Rui F and Coelho, Pedro G and Gustavo, Carolina V and Almeida, Cláudia J and Farias, Francisco Werley Cipriano and Duarte, Valdemar R and Xavier, José and Esteves, Marcos B and Conde, Fábio M and Cunha, Filipa G and Santos, Telmo G},
  title = {Functionally Graded Materials and Structures: Unified Approach by Optimal Design, Metal Additive Manufacturing, and Image-Based Characterization},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {18},
  pages = {4545},
  doi = {10.3390/ma17184545}
}
Kostenlos starten →