Study on the Performance of Epoxy-Modified Asphalt and Steel Slag Ultra-Thin Friction Course
Materials · 13.09.2024 · 17 (18) · 4513
DOI: 10.3390/ma17184513 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 13.09.2024. Verfasst von Quanmin Zhang und 6 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Silicate Materials for Architectures, Wuhan University of Technology, Wuhan 430070, China. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Key R&D Program of Guangxi Province, Hubei Science and Technology Innovation Talent and Service Project.
Abstract (Originalsprache)
Ultra-thin overlays (UTOL) are a standard highway pre-maintenance method used to improve the road surface performance of asphalt pavements and to repair minor rutting and cracking. However, the thin thickness makes it very sensitive to external changes, which increases its wear and shortens its life. So, this paper aims to prepare a durable and skid-resistance asphalt ultra-thin overlay using epoxy asphalt (EA) and steel slag. First, the physical properties of EA were characterized by penetration, softening point, flexibility, and kinematic viscosity tests. The dynamic shear rheometer (DSR) test characterizes EA’s rheological properties. Differential Scanning Calorimetry (DSC), kinematic viscosity, and Fourier transform infrared spectroscopy (FTIR) characterized the EA’s curing process. Finally, the pavement performance of an epoxy ultra-thin overlay (EUTOL) prepared with EA and steel slag was tested. The results show that the epoxy resin particles increase with the increase in epoxy resin dosage, and at 40%, its epoxy particles are uniformly distributed with the most significant area share. With the addition of epoxy resin, the needle penetration of EA decreases and then increases, the flexibility decreases at a slower rate, and the softening point rises significantly. Moreover, the growth of the elastic component in EA significantly improved the high-temperature viscoelastic properties. Considering its physical and rheological properties, the optimal doping amount of 40% was selected. By analyzing the curing behavior of EA (optimum dosage), the combination temperature of EA is 150 °C, which meets the needs of mixing and paving asphalt mixtures. After 12 h of maintenance at 120 °C, its reaction is sufficient. The skid-resistance durability, high-temperature, low-temperature, water stability, and fatigue resistance of UTOL can be effectively improved using steel slag coarse aggregate.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Silicate Materials for Architectures, Wuhan University of Technology, Wuhan 430070, China.
- School of Transportation and Logistics Engineering, Wuhan University of Technology, Wuhan 430063, China.
- School of Civil Engineering and Architecture, Wuhan Institute of Technology, Wuhan 430074, China.
ORCID-Profile: Haiqin Xu, Yuanyuan Li
Förderung
- National Natural Science Foundation of China
- Key R&D Program of Guangxi Province
- Hubei Science and Technology Innovation Talent and Service Project
- Science and Technology Project of the Department of Transportation of Guangxi Autonomous Region
Zitieren
APA
Zhang, Q., Lu, Z., Chen, A., Wu, S., Feng, J., Xu, H., & Li, Y. (2024). Study on the Performance of Epoxy-Modified Asphalt and Steel Slag Ultra-Thin Friction Course. Materials, 17(18), 4513. https://doi.org/10.3390/ma17184513
Vancouver
Zhang Q, Lu Z, Chen A, Wu S, Feng J, Xu H, et al. Study on the Performance of Epoxy-Modified Asphalt and Steel Slag Ultra-Thin Friction Course. Materials. 2024;17(18):4513. doi:10.3390/ma17184513
BibTeX
@article{Zhang2024,
author = {Zhang, Quanmin and Lu, Ziyu and Chen, Anqi and Wu, Shaopeng and Feng, Jianlin and Xu, Haiqin and Li, Yuanyuan},
title = {Study on the Performance of Epoxy-Modified Asphalt and Steel Slag Ultra-Thin Friction Course},
journal = {Materials},
year = {2024},
volume = {17},
number = {18},
pages = {4513},
doi = {10.3390/ma17184513}
}
EUVIMED