EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Cold-Source Composite Welding Repair of 9Cr2Mo Thick-Walled Parts: Microstructure, Mechanical Properties, and Finite Element Simulation

Danqing Yin, Haoqi Zhao, Yonglei Wang, Ning Ma iD, Junming Chang, Meng Wang, Jinglong Dong

Materials · 13.09.2024 · 17 (18) · 4496

DOI: 10.3390/ma17184496 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 13.09.2024. Verfasst von Danqing Yin und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Henan University of Science and Technology, Luoyang 471023, China. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Core Technology Research and Development Project for Public Welfare of Luoyang City, Frontier Exploration Projects of Longmen Laboratory, China Postdoctoral Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The restoration of large support rollers poses an industrial challenge due to the high energy consumption of traditional repair methods. Consequently, a novel approach for repairing support rollers has been introduced and tested on thick-walled components. Finite element simulations aided the study of welding repairs for large thick-walled components, examining element distribution, microstructure, mechanical properties, and residual stress distribution across various processes. The results indicate that employing ABAQUS2023 finite element software to analyze stress variations under different working conditions, the Dynamically Controlled Low-Stress No-Distortion method effectively mitigates residual stresses both during and post welding, reducing average transverse residual stresses by 14.5% and average longitudinal residual stresses in the weld zone by 29.1%. The Dynamically Controlled Low-Stress No-Distortion method narrows the high-temperature range of the heat source, consequently decreasing the size of the heat-affected zone by 33.3% compared to conventional welding. The microstructure featured dendrites and equiaxed columnar crystals, with the Dynamically Controlled Low-Stress No-Distortion method capable of grain refinement, transforming some equiaxed columnar crystals into cellular structures. As grains were refined, microhardness improved, with the covering layer’s microhardness rising by 14.68%. A comparison between simulated and measured values of lateral and longitudinal residual stresses at corresponding points revealed discrepancies of 14.6% and 20.5% in accuracy, respectively.

Schlagwörter

Stichwörter der Autor:innen

finite element simulationheat-affected zonemicrohardnessresidual stresssupport roller

Autor:innen und Institutionen

  • School of Materials Science and Engineering, Henan University of Science and Technology, Luoyang 471023, China.
  • Longmen Laboratory, Luoyang 471000, China.
  • Luoyang Leishuo Additive Manufacturing Co., Ltd., Luoyang 471100, China.

ORCID-Profile: Ning Ma

Förderung

  • Core Technology Research and Development Project for Public Welfare of Luoyang City
  • Frontier Exploration Projects of Longmen Laboratory
  • China Postdoctoral Science Foundation

Zitieren

APA

Yin, D., Zhao, H., Wang, Y., Ma, N., Chang, J., Wang, M., & Dong, J. (2024). Cold-Source Composite Welding Repair of 9Cr2Mo Thick-Walled Parts: Microstructure, Mechanical Properties, and Finite Element Simulation. Materials, 17(18), 4496. https://doi.org/10.3390/ma17184496

Vancouver

Yin D, Zhao H, Wang Y, Ma N, Chang J, Wang M, et al. Cold-Source Composite Welding Repair of 9Cr2Mo Thick-Walled Parts: Microstructure, Mechanical Properties, and Finite Element Simulation. Materials. 2024;17(18):4496. doi:10.3390/ma17184496

BibTeX
@article{Yin2024,
  author = {Yin, Danqing and Zhao, Haoqi and Wang, Yonglei and Ma, Ning and Chang, Junming and Wang, Meng and Dong, Jinglong},
  title = {Cold-Source Composite Welding Repair of 9Cr2Mo Thick-Walled Parts: Microstructure, Mechanical Properties, and Finite Element Simulation},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {18},
  pages = {4496},
  doi = {10.3390/ma17184496}
}
Kostenlos starten →