EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Alloying on Microstructure and Mechanical Properties of AlCoCrFeNi2.1 Eutectic High-Entropy Alloy

Xue-Yao Tian, Hong-Liang Zhang, Zhi-Sheng Nong iD, Xue Cui, Ze-Hao Gu, Teng Liu, Hong-Mei Li iD, Eshkuvat Arzikulov

Materials · 12.09.2024 · 17 (18) · 4471

DOI: 10.3390/ma17184471 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 12.09.2024. Verfasst von Xue-Yao Tian und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Shenyang Aerospace University, Shenyang 110136, China. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Liaoning Provincial Natural Science Foundation of China, Basic scientific research project of higher education Department of Liaoning Province, Shenyang Science and Technology Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In order to explore the effect of alloying on the microstructures and mechanical properties of AlCoCrFeNi2.1 eutectic high-entropy alloys (EHEAs), 0.1, 0.2, and 0.3 at.% V, Mo, and B were added to the AlCoCrFeNi2.1 alloy in this work. The effects of the elements and contents on the phase composition, microstructures, mechanical properties, and fracture mechanism were investigated. The results showed that the crystal structures of the AlCoCrFeNi2.1 EHEAs remained unchanged, and the alloys were still composed of FCC and BCC structures, whose content varied with the addition of alloying elements. After alloying, the aggregation of Co, Cr, Al, and Ni elements remained unchanged, and the V and Mo were distributed in both dendritic and interdendritic phases. The tensile strengths of the alloys all exceeded 1000 MPa when the V and Mo elements were added, and the Mo0.2 alloy had the highest tensile strength, of 1346.3 MPa, and fracture elongation, of 24.6%. The alloys with the addition of V and Mo elements showed a mixed ductile and brittle fracture, while the B-containing alloy presented a cleavage fracture. The fracture mechanism of Mo0.2 alloy is mainly crack propagation in the BCC lamellae, and the FCC dendritic lamellae exhibit the characteristics of plastic deformation.

Schlagwörter

Stichwörter der Autor:innen

alloyingeutectic high-entropy alloyfracture mechanismmechanical propertiesmicrostructures

Autor:innen und Institutionen

  • School of Materials Science and Engineering, Shenyang Aerospace University, Shenyang 110136, China.
  • Institute of Physics, Samarkand State University Named after Sharof Rashidov, University Boulevard 15, Samarkand 140104, Uzbekistan.

ORCID-Profile: Zhi-Sheng Nong, Hong-Mei Li

Förderung

  • Liaoning Provincial Natural Science Foundation of China
  • Basic scientific research project of higher education Department of Liaoning Province
  • Shenyang Science and Technology Project
  • fundamental research funds for the universities of Liaoning province

Zitieren

APA

Tian, X. Y., Zhang, H. L., Nong, Z. S., Cui, X., Gu, Z. H., Liu, T., Li, H. M., & Arzikulov, E. (2024). Effect of Alloying on Microstructure and Mechanical Properties of AlCoCrFeNi2.1 Eutectic High-Entropy Alloy. Materials, 17(18), 4471. https://doi.org/10.3390/ma17184471

Vancouver

Tian XY, Zhang HL, Nong ZS, Cui X, Gu ZH, Liu T, et al. Effect of Alloying on Microstructure and Mechanical Properties of AlCoCrFeNi2.1 Eutectic High-Entropy Alloy. Materials. 2024;17(18):4471. doi:10.3390/ma17184471

BibTeX
@article{Tian2024,
  author = {Tian, Xue-Yao and Zhang, Hong-Liang and Nong, Zhi-Sheng and Cui, Xue and Gu, Ze-Hao and Liu, Teng and Li, Hong-Mei and Arzikulov, Eshkuvat},
  title = {Effect of Alloying on Microstructure and Mechanical Properties of AlCoCrFeNi2.1 Eutectic High-Entropy Alloy},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {18},
  pages = {4471},
  doi = {10.3390/ma17184471}
}
Kostenlos starten →