EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Lifecycle Assessment and Multi-Parameter Optimization of Lightweight Cement Mortar with Nano Additives

Yiying Du, Aleksandrs Korjakins iD, Maris Sinka iD, Ina Pundienė iD

Materials · 09.09.2024 · 17 (17) · 4434

DOI: 10.3390/ma17174434 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 09.09.2024. Verfasst von Yiying Du und 3 weiteren Autor:innen. Beteiligte Einrichtung: Laboratory of Concrete Technology, Institute of Building Materials, Vilnius Gediminas Technical University, Linkmenu Str. 28, LT-08217 Vilnius, Lithu…. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 90 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Riga Technical University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

With the growing global concerns regarding sustainable development in the building and construction industries, concentration only on the engineering properties of building materials can no longer meet the requirements. Although some studies have been implemented based on the lifecycle assessment of lightweight cement-based materials, very few attempts have been made pertaining to multi-criteria optimization, especially when fly ash cenospheres are used as lightweight aggregates and nano additives are incorporated as modifying admixtures. This investigation utilized cenospheres as fine aggregates to produce green, sustainable, lightweight cement mortar. Multi-walled carbon nanotubes at 0.05, 0.15, and 0.45% were binarily added, together with 0.2, 0.6, and 1.0% of nano silica to improve the mechanical performance. Strength tests were conducted to measure the flexural and compressive behaviors, combined with a cradle-to-gate lifecycle assessment and direct cost analysis to assess the environmental and economic viability. Integrated indexes and the TOPSIS method were adopted to systematically evaluate the mortar mixes and determine the optimal mix. The outcomes show that nano additives worked synergically to enhance the mechanical properties of the mortars. The utilization of cenospheres effectively reduced environmental impacts and improved economic feasibility. Nano additives significantly affected the sustainability and economic viability; in particular, the utilization of multi-walled carbon nanotubes increased the material costs. To minimize the impact of the price of multi-walled carbon nanotubes, it is proposed to binarily use less expensive nano silica. In the multi-parameter optimization, the mix with 0.05% multi-walled carbon nanotubes and 0.02% nano silica was recommended to be the optimal mix.

Schlagwörter

Stichwörter der Autor:innen

TOPSIS methodcompressive strengtheconomic analysisenvironmental impactsflexural strengthfly ash cenospheres

Autor:innen und Institutionen

  • Laboratory of Concrete Technology, Institute of Building Materials, Vilnius Gediminas Technical University, Linkmenu Str. 28, LT-08217 Vilnius, Lithuania.
  • Institute of Sustainable Building Materials and Engineering Systems, Faculty of Civil and Mechanical Engineering, Riga Technical University, Kipsalas St. 6A, LV-1048 Riga, Latvia.

ORCID-Profile: Aleksandrs Korjakins, Maris Sinka, Ina Pundienė

Förderung

  • Riga Technical University

Zitieren

APA

Du, Y., Korjakins, A., Sinka, M., & Pundienė, I. (2024). Lifecycle Assessment and Multi-Parameter Optimization of Lightweight Cement Mortar with Nano Additives. Materials, 17(17), 4434. https://doi.org/10.3390/ma17174434

Vancouver

Du Y, Korjakins A, Sinka M, Pundienė I. Lifecycle Assessment and Multi-Parameter Optimization of Lightweight Cement Mortar with Nano Additives. Materials. 2024;17(17):4434. doi:10.3390/ma17174434

BibTeX
@article{Du2024,
  author = {Du, Yiying and Korjakins, Aleksandrs and Sinka, Maris and Pundienė, Ina},
  title = {Lifecycle Assessment and Multi-Parameter Optimization of Lightweight Cement Mortar with Nano Additives},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {17},
  pages = {4434},
  doi = {10.3390/ma17174434}
}
Kostenlos starten →