Analysis of the Mechanical Properties of Structural Ceramics Made from Aggregate Washing Sludge and Manganese Mining Waste
Materials · 09.09.2024 · 17 (17) · 4427
DOI: 10.3390/ma17174427 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 09.09.2024. Verfasst von Juan María Terrones-Saeta und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Industrial Engineering and Civil Engineering, Area of Mechanics of Continuous Media and Theory of Structures, Higher Technical School o…. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The construction sector is presently among the most resource-intensive industries, driving a substantial body of research dedicated to the development of more sustainable materials to address these demands. A particularly promising approach within the framework of the circular economy is the repurposing of waste as a principal raw material for the creation of new construction products. Within this context, the primary aim of this study is to engineer ceramic materials for brick production using 100% waste-derived inputs, specifically aggregate washing sludge and manganese mining by-products. To evaluate the potential of these sustainable ceramic materials, an extensive investigation was conducted, encompassing both physical and mechanical testing, as well as a thorough characterisation of the waste inputs. For this purpose, a series of ceramic specimens were fabricated with varying proportions of mining residues and aggregate washing sludge, adhering to the conventional protocols employed in the manufacture of ceramic bricks. The results demonstrate that these sustainable ceramics exhibit a linear shrinkage reduction of up to 5% compared to traditional clay-based ceramics. Furthermore, they show water absorption levels—whether via capillarity, cold water, or hot water absorption—that are up to twice those observed in conventional clay ceramics, while maintaining comparable density values. This increased absorption, however, correlates with a reduction in mechanical strength at higher concentrations of manganese waste, yet the material continues to meet the minimum strength requirements as specified by industry standards for such products. In conclusion, this research introduces a novel, sustainable ceramic material that not only reduces economic and environmental costs but also adheres to the required performance criteria for construction applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Industrial Engineering and Civil Engineering, Area of Mechanics of Continuous Media and Theory of Structures, Higher Technical School of Engineering of Algeciras, University of Cádiz, 11002 Cádiz, Spain.
- Department of Mining, Mechanical, Energy and Construction Engineering, Higher School of Engineering, University of Huelva, 21007 Huelva, Spain.
- Department of Materials Science and Metallurgical Engineering, University of Oviedo, 33004 Oviedo, Spain.
ORCID-Profile: Juan María Terrones-Saeta, Vanesa Domínguez, Emilio Romero, Juan Asensio-Lozano
Zitieren
APA
Terrones-Saeta, J. M., Domínguez, V., Ramos, D., Romero, E., & Asensio-Lozano, J. (2024). Analysis of the Mechanical Properties of Structural Ceramics Made from Aggregate Washing Sludge and Manganese Mining Waste. Materials, 17(17), 4427. https://doi.org/10.3390/ma17174427
Vancouver
Terrones-Saeta JM, Domínguez V, Ramos D, Romero E, Asensio-Lozano J. Analysis of the Mechanical Properties of Structural Ceramics Made from Aggregate Washing Sludge and Manganese Mining Waste. Materials. 2024;17(17):4427. doi:10.3390/ma17174427
BibTeX
@article{TerronesSaeta2024,
author = {Terrones-Saeta, Juan María and Domínguez, Vanesa and Ramos, Daniel and Romero, Emilio and Asensio-Lozano, Juan},
title = {Analysis of the Mechanical Properties of Structural Ceramics Made from Aggregate Washing Sludge and Manganese Mining Waste},
journal = {Materials},
year = {2024},
volume = {17},
number = {17},
pages = {4427},
doi = {10.3390/ma17174427}
}
EUVIMED