EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Survey of Microstructures and Dimensional Accuracy of Various Microlattice Designs Using Additively Manufactured 718 Superalloy

Huan Li, Benjamin Stegman iD, Chao Shen, Shiyu Zhou, Anyu Shang iD, Yang Chen, Emiliano Joseph Flores, R Edwin García iD, Xinghang Zhang iD, Haiyan Wang iD

Materials · 01.09.2024 · 17 (17) · 4334

DOI: 10.3390/ma17174334 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 01.09.2024. Verfasst von Huan Li und 9 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Engineering, Purdue University, West Lafayette, IN 47907, USA. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Office of Naval Research, National Science Foundation, U.S. Office of Naval Research.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Microlattices hold significant potential for developing lightweight structures for the aeronautics and astronautics industries. Laser Powder Bed Fusion (LPBF) is an attractive method for producing these structures due to its capacity for achieving high-resolution, intricately designed architectures. However, defects, such as cracks, in the as-printed alloys degrade mechanical properties, particularly tensile strength, and thereby limit their applications. This study examines the effects of microlattice architecture and relative density on crack formation in the as-printed 718 superalloy. Complex microlattice design and higher relative density are more prone to large-scale crack formation. The mechanisms behind these phenomena are discussed. This study reveals that microlattice type and relative density are crucial factors in defect formation in LPBF metallic alloys. The transmission electron microscopy observations show roughly round γ″ precipitates with an average size of 10 nm in the as-printed 718 without heat treatment. This work demonstrates the feasibility of the additive manufacturing of complex microlattices using 718 superalloys towards architectured lightweight structures.

Schlagwörter

Stichwörter der Autor:innen

additive manufacturingarchitecturecrack formationinconel 718microlatticestransmission electron microscopy (TEM)

Autor:innen und Institutionen

  • School of Materials Engineering, Purdue University, West Lafayette, IN 47907, USA.
  • School of Electrical and Computer Engineering, Purdue University, West Lafayette, IN 47907, USA.

ORCID-Profile: Benjamin Stegman, Anyu Shang, R Edwin García, Xinghang Zhang, Haiyan Wang

Förderung

  • Office of Naval Research
  • National Science Foundation
  • U.S. Office of Naval Research
  • NSF-DFG CMMI

Zitieren

APA

Li, H., Stegman, B., Shen, C., Zhou, S., Shang, A., Chen, Y., Flores, E. J., García, R. E., Zhang, X., & Wang, H. (2024). Survey of Microstructures and Dimensional Accuracy of Various Microlattice Designs Using Additively Manufactured 718 Superalloy. Materials, 17(17), 4334. https://doi.org/10.3390/ma17174334

Vancouver

Li H, Stegman B, Shen C, Zhou S, Shang A, Chen Y, et al. Survey of Microstructures and Dimensional Accuracy of Various Microlattice Designs Using Additively Manufactured 718 Superalloy. Materials. 2024;17(17):4334. doi:10.3390/ma17174334

BibTeX
@article{Li2024,
  author = {Li, Huan and Stegman, Benjamin and Shen, Chao and Zhou, Shiyu and Shang, Anyu and Chen, Yang and Flores, Emiliano Joseph and García, R Edwin and Zhang, Xinghang and Wang, Haiyan},
  title = {Survey of Microstructures and Dimensional Accuracy of Various Microlattice Designs Using Additively Manufactured 718 Superalloy},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {17},
  pages = {4334},
  doi = {10.3390/ma17174334}
}
Kostenlos starten →