EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical and Fatigue Properties of Welded Fe-Mn-Si Shape Memory Alloys

Kinam Hong, Sangwon Ji iD, Dohyung Kim iD, Jinyoung Bae

Materials · 30.08.2024 · 17 (17) · 4304

DOI: 10.3390/ma17174304 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 30.08.2024. Verfasst von Kinam Hong und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Civil Engineering, Chungbuk National University, 1 Chungdae-ro, Seowon-gu, Cheongju 28644, Republic of Korea. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Industry and Energy and Korea Institute for Advancement of Technology, Ministry of Trade, Industry and Energy (MOTIE).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper presents the experimental results of a study evaluating the mechanical and fatigue performance of welded Fe-Mn-Si SMA. For the experimental study, welded and welded-and-heat-treated Fe-Mn-Si SMA specimens were fabricated, and fatigue tests were performed at various stress amplitudes. In addition, direct tensile tests and recovery stress tests were also performed to evaluate the material properties of Fe-Mn-Si SMAs. The elastic modulus, yield strength, and tensile strength of the welded specimens were reduced by 35.4%, 12.1%, and 8.6%, respectively, compared to the values of the non-welded specimens. On the other hand, the elastic modulus, yield strength, and tensile strength of the welded-and-heat-treated Fe-Mn-Si SMA specimens were increased by 18.6%, 4.9%, and 1.3%, respectively, compared to the values of the welded specimens. Both welded and welded-and-heat-treated Fe-Mn-Si SMAs failed at lower cycles than the conventional Fe-Mn-Si SMAs at the same stress amplitude. High-cycle fatigue failure, characterized by cycles exceeding 104, typically occurs at relatively low stress levels within the elastic region, whereas low-cycle fatigue failure, generally occurring within cycles below 104, involves high stress levels that encompass both elastic and plastic deformation. Regardless of the welding condition, the stress amplitude at which Fe-Mn-Si SMA transitions from high-cycle to low-cycle failure exceeded the yield strength.

Schlagwörter

Stichwörter der Autor:innen

Fe-Mn-Si shape memory alloyhigh-cycle fatigue behaviormicrostructureshape memory effectwelding fatigue characterization

Autor:innen und Institutionen

  • Department of Civil Engineering, Chungbuk National University, 1 Chungdae-ro, Seowon-gu, Cheongju 28644, Republic of Korea.
  • Dongnam Regional Division, Korea Institute of Industrial Technology, Yangsan 50623, Republic of Korea.

ORCID-Profile: Sangwon Ji, Dohyung Kim

Förderung

  • Industry and Energy and Korea Institute for Advancement of Technology
  • Ministry of Trade, Industry and Energy (MOTIE)

Zitieren

APA

Hong, K., Ji, S., Kim, D., & Bae, J. (2024). Mechanical and Fatigue Properties of Welded Fe-Mn-Si Shape Memory Alloys. Materials, 17(17), 4304. https://doi.org/10.3390/ma17174304

Vancouver

Hong K, Ji S, Kim D, Bae J. Mechanical and Fatigue Properties of Welded Fe-Mn-Si Shape Memory Alloys. Materials. 2024;17(17):4304. doi:10.3390/ma17174304

BibTeX
@article{Hong2024,
  author = {Hong, Kinam and Ji, Sangwon and Kim, Dohyung and Bae, Jinyoung},
  title = {Mechanical and Fatigue Properties of Welded Fe-Mn-Si Shape Memory Alloys},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {17},
  pages = {4304},
  doi = {10.3390/ma17174304}
}
Kostenlos starten →