EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Simulation Study on Residual Stress Distribution of Machined Surface Layer in Two-Step Cutting of Titanium Alloy

Jingyi Wang, Bo Kong, Shulei Wei, Jian Zang, Anhai Li iD

Materials · 29.08.2024 · 17 (17) · 4283

DOI: 10.3390/ma17174283 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 29.08.2024. Verfasst von Jingyi Wang und 4 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, School of Mechanical Engineering, Shandong University, Jinan 250061, China. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Shandong Province, National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Ti-6Al-4V titanium alloy is known as one of the most difficult metallic materials to machine, and the machined surface residual stress distribution significantly affects properties such as static strength, fatigue strength, corrosion resistance, etc. This study utilized finite element software Abaqus 2020 to simulate the two-step cutting process of titanium alloy, incorporating stages of cooling, unloading, and de-constraining of the workpiece. The chip morphology and cutting force obtained from orthogonal cutting tests were used to validate the finite element model. Results from the orthogonal cutting simulations revealed that with increasing cutting speed and the tool rake angle, the residual stress undergoes a transition from compressive to tensile stress. To achieve greater residual compressive stress during machining, it is advisable to opt for a negative rake angle coupled with a lower cutting speed. Additionally, in two-step machining of titanium alloy, the initial cutting step exerts a profound influence on the subsequent cutting step, thereby shortening the evolution time of the Mises stress, equivalent plastic strain, and stiffness damage equivalent in the subsequent cutting step. These results contribute to optimizing titanium alloy machining processes by providing insights into controlling residual stress, ultimately enhancing product quality and performance of structural part of titanium alloy.

Schlagwörter

Stichwörter der Autor:innen

finite element analysishigh-speed cuttingresidual stresstitanium alloytwo-step cutting

Autor:innen und Institutionen

  • Key Laboratory of High Efficiency and Clean Mechanical Manufacture of MOE, School of Mechanical Engineering, Shandong University, Jinan 250061, China.
  • Shandong Engineering Research Center for Downhole Cementing and Completion Tools in Petroleum Engineering, Shelfoil Petroleum Equipment & Services Co., Ltd., Dezhou 253034, China.

ORCID-Profile: Anhai Li

Förderung

  • Natural Science Foundation of Shandong Province
  • National Natural Science Foundation of China

Zitieren

APA

Wang, J., Kong, B., Wei, S., Zang, J., & Li, A. (2024). Simulation Study on Residual Stress Distribution of Machined Surface Layer in Two-Step Cutting of Titanium Alloy. Materials, 17(17), 4283. https://doi.org/10.3390/ma17174283

Vancouver

Wang J, Kong B, Wei S, Zang J, Li A. Simulation Study on Residual Stress Distribution of Machined Surface Layer in Two-Step Cutting of Titanium Alloy. Materials. 2024;17(17):4283. doi:10.3390/ma17174283

BibTeX
@article{Wang2024,
  author = {Wang, Jingyi and Kong, Bo and Wei, Shulei and Zang, Jian and Li, Anhai},
  title = {Simulation Study on Residual Stress Distribution of Machined Surface Layer in Two-Step Cutting of Titanium Alloy},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {17},
  pages = {4283},
  doi = {10.3390/ma17174283}
}
Kostenlos starten →