EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Energy Absorption Behavior of Carbon-Fiber-Reinforced Plastic Honeycombs under Low-Velocity Impact Considering Their Ply Characteristics

Zheng Liu iD, Kai Zou, Zhendong Zhang

Materials · 28.08.2024 · 17 (17) · 4257

DOI: 10.3390/ma17174257 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 28.08.2024. Verfasst von Zheng Liu und 2 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing 210094, China. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Honeycomb structures made of carbon-fiber-reinforced plastic (CFRP) are increasingly used in the aerospace field due to their excellent energy absorption capability. Attention has been paid to CFRP structures in order to accurately simulate their progressive failure behavior and discuss their ply designability. In this study, the preparation process of a CFRP corrugated sheet (half of the honeycomb structure) and a CFRP honeycomb structure was illustrated. The developed finite element method was verified by a quasi-static test, which was then used to predict the low-velocity impact (LVI) behavior of the CFRP honeycomb, and ultimately, the influence of the ply angle and number on energy absorption was discussed. The results show that the developed finite element method (including the user-defined material subroutine VUMAT) can reproduce the progressive failure behavior of the CFRP corrugated sheet under quasi-static compression and also estimate the LVI behavior. The angle and number of plies of the honeycomb structure have an obvious influence on their energy absorption under LVI. Among them, energy absorption increases with the ply number, but the specific energy absorption is basically constant. The velocity drop ratios for the five different ply angles are 79.12%, 68.49%, 66.88%, 66.86%, and 60.02%, respectively. Therefore, the honeycomb structure with [0/90]s ply angle had the best energy absorption effect. The model proposed in this paper has the potential to significantly reduce experimental expenses, while the research findings can provide valuable technical support for design optimization in aerospace vehicle structures.

Schlagwörter

Stichwörter der Autor:innen

carbon-fiber-reinforced plastic (CFRP)cushioning energy absorptionfinite element simulationhoneycomb structurelow-velocity impact (LVI)progressive failure

Autor:innen und Institutionen

  • School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing 210094, China.

ORCID-Profile: Zheng Liu

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Liu, Z., Zou, K., & Zhang, Z. (2024). Energy Absorption Behavior of Carbon-Fiber-Reinforced Plastic Honeycombs under Low-Velocity Impact Considering Their Ply Characteristics. Materials, 17(17), 4257. https://doi.org/10.3390/ma17174257

Vancouver

Liu Z, Zou K, Zhang Z. Energy Absorption Behavior of Carbon-Fiber-Reinforced Plastic Honeycombs under Low-Velocity Impact Considering Their Ply Characteristics. Materials. 2024;17(17):4257. doi:10.3390/ma17174257

BibTeX
@article{Liu2024,
  author = {Liu, Zheng and Zou, Kai and Zhang, Zhendong},
  title = {Energy Absorption Behavior of Carbon-Fiber-Reinforced Plastic Honeycombs under Low-Velocity Impact Considering Their Ply Characteristics},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {17},
  pages = {4257},
  doi = {10.3390/ma17174257}
}
Kostenlos starten →