Research Progress on the Microstructure Evolution Mechanisms of Al-Mg Alloys by Severe Plastic Deformation
Materials · 27.08.2024 · 17 (17) · 4235
DOI: 10.3390/ma17174235 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 27.08.2024. Verfasst von Chang-Rong Song und 13 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Automobile Materials, Ministry of Education and Department of Materials Science and Engineering, Jilin University, Renmin Street No…. Die Arbeit wurde bisher 28-mal zitiert (Crossref) und nennt 173 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: undergraduate Innovation Fund of Jilin University, China, Science and Technology Development Program of Jilin Province, China.
Abstract (Originalsprache)
Al-Mg alloys are widely used as important engineering structural materials in aerospace engineering, transportation systems, and structural constructions due to their low density, high specific strength, corrosion resistance, welding capability, fatigue strength, and cost-effectiveness. However, the conventional Al-Mg alloys can no longer fully satisfy the demands of practical production due to difficulties caused by many defects. The high strength of Al-Mg alloys as non-heat treatment precipitation-strengthened alloys is achieved primarily by solid solution strengthening along with work hardening rather than precipitation strengthening. Therefore, severe plastic deformation (SPD) techniques can be often used to produce ultrafine-grained structures to fabricate ultra-high strength aluminum alloys. However, this approach often achieves the strengthening of material at the cost of reduced ductility. This paper comprehensively summarizes the various approaches of ultrafine/nanocrystalline materials for enhancing their plasticity, elaborates on the creation of a bimodal microstructure within the alloy, and discusses the formation of a nanotwin microstructure within the alloy and the incorporation of dispersed nanoparticles. The mechanisms underlying both the strengthening and toughening during large plastic deformation in aluminum alloys are summarized, and the future research direction of high-performance ultrafine crystalline and nanocrystalline Al-Mg aluminum alloys is prospected.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Key Laboratory of Automobile Materials, Ministry of Education and Department of Materials Science and Engineering, Jilin University, Renmin Street No. 5988, Changchun 130025, China.
- United Automotive Electronic Systems Limited Company, Rongqiao Street No. 555, Pudong New Area, Shanghai 201206, China.
- Jilin Liyuan Precision Manufacturing Co., Ltd., No. 5729, Xi'ning Road, Economic Development Zone, Liaoyuan 136299, China.
- Department and Test Center, FAW-Volkswagen Automotive Co., Ltd., Changchun 130011, China.
- Cansinga Technology Co., Ltd., Building D, Central Avenue, Bao'an District, Shenzhen 518101, China.
- Technology Research and Development Casting & Forging Research Institute, FAW Foundry Co., Ltd., Crossing of Hexie Street & Bingwu Road Automotive Industry Development Zone, Changchun 130013, China.
ORCID-Profile: Feng Qiu
Förderung
- undergraduate Innovation Fund of Jilin University, China
- Science and Technology Development Program of Jilin Province, China
Zitieren
APA
Song, C. R., Zhang, S. Y., Liu, L., Yang, H. Y., Kang, J., Meng, J., Luo, C. J., Wang, C. G., Cao, K., Qiao, J., Shu, S. L., Zhu, M., Qiu, F., & Jiang, Q. C. (2024). Research Progress on the Microstructure Evolution Mechanisms of Al-Mg Alloys by Severe Plastic Deformation. Materials, 17(17), 4235. https://doi.org/10.3390/ma17174235
Vancouver
Song CR, Zhang SY, Liu L, Yang HY, Kang J, Meng J, et al. Research Progress on the Microstructure Evolution Mechanisms of Al-Mg Alloys by Severe Plastic Deformation. Materials. 2024;17(17):4235. doi:10.3390/ma17174235
BibTeX
@article{Song2024,
author = {Song, Chang-Rong and Zhang, Si-Yu and Liu, Lin and Yang, Hong-Yu and Kang, Jie and Meng, Jia and Luo, Chang-Jie and Wang, Cheng-Gang and Cao, Kuang and Qiao, Jian and Shu, Shi-Li and Zhu, Ming and Qiu, Feng and Jiang, Qi-Chuan},
title = {Research Progress on the Microstructure Evolution Mechanisms of Al-Mg Alloys by Severe Plastic Deformation},
journal = {Materials},
year = {2024},
volume = {17},
number = {17},
pages = {4235},
doi = {10.3390/ma17174235}
}
EUVIMED