EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fabrication and Characterization of Polycaprolactone–Baghdadite Nanofibers by Electrospinning Method for Tissue Engineering Applications

Mir Reza Forogh, Rahmatollah Emadi, Mehdi Ahmadian, Abdollah Saboori iD

Materials · 23.08.2024 · 17 (17) · 4187

DOI: 10.3390/ma17174187 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 23.08.2024. Verfasst von Mir Reza Forogh und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Engineering, Isfahan University of Technology, Isfahan 8415683111, Iran. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work investigates the essential constituents, production methods, and properties of polycaprolactone (PCL) and Baghdadite fibrous scaffolds. In this research, electrospinning was used to produce fiber ropes. In this study, the Baghdadite powder was synthesized using the sol–gel method and incorporated into PCL’s polymeric matrix in formic acid and acetic acid solvents. The present work examined PCL–Baghdadite fibrous scaffolds at 1%, 3%, and 5 wt% for morphology, fiber diameter size, hydrophilicity, porosity, mechanical properties, degradability, and bioactivity. The introduction of Baghdadite nanopowder into pure PCL scaffolds reduced fiber diameter. The wetting angle decreased when Baghdadite nanopowder was added to fibrous scaffolds. Pure PCL reduced the wetting angle from 93.20° to 70.53°. Fibrous PCL scaffolds with Baghdadite nanopowder have better mechanical characteristics. The tensile strength of pure PCL fibers was determined at 2.08 ± 0.2 MPa, which was enhanced by up to 3 wt% by adding Baghdadite nanopowder. Fiber elasticity increased with tensile strength. Baghdadite at a 5% weight percentage reduced failure strain percentage. Fibers with more Baghdadite nanopowder biodegrade faster. Adding Baghdadite ceramic nanoparticles resulted in increased bioactivity and caused scaffolds to generate hydroxyapatite. The results show that Baghdadite PCL-3 wt% fibers have promising shape, diameter, and mechanical qualities. After 24 h, L-929 fibroblast cell viability was greater in the scaffold with 3% Baghdadite weight compared to the pure PCL. PCL-3 wt% Baghdadite fibers generated hydroxyapatite on the surface and degraded well. Based on the above findings, PCL fibers having 3 wt% of Baghdadite are the best sample for tissue engineering applications that heal flaws.

Schlagwörter

Stichwörter der Autor:innen

PCL–Baghdaditebioactivitydegradabilityelectrospinningtissue engineering

Autor:innen und Institutionen

  • Department of Materials Engineering, Isfahan University of Technology, Isfahan 8415683111, Iran.
  • Integrated Additive Manufacturing Center, Department of Management and Production Engineering, Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Tornio, Italy.

ORCID-Profile: Abdollah Saboori

Zitieren

APA

Forogh, M. R., Emadi, R., Ahmadian, M., & Saboori, A. (2024). Fabrication and Characterization of Polycaprolactone–Baghdadite Nanofibers by Electrospinning Method for Tissue Engineering Applications. Materials, 17(17), 4187. https://doi.org/10.3390/ma17174187

Vancouver

Forogh MR, Emadi R, Ahmadian M, Saboori A. Fabrication and Characterization of Polycaprolactone–Baghdadite Nanofibers by Electrospinning Method for Tissue Engineering Applications. Materials. 2024;17(17):4187. doi:10.3390/ma17174187

BibTeX
@article{Forogh2024,
  author = {Forogh, Mir Reza and Emadi, Rahmatollah and Ahmadian, Mehdi and Saboori, Abdollah},
  title = {Fabrication and Characterization of Polycaprolactone–Baghdadite Nanofibers by Electrospinning Method for Tissue Engineering Applications},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {17},
  pages = {4187},
  doi = {10.3390/ma17174187}
}
Kostenlos starten →