Temperature Effect on Deformation Mechanisms and Mechanical Properties of Welded High-Mn Steels for Cryogenic Applications
Materials · 22.08.2024 · 17 (16) · 4159
DOI: 10.3390/ma17164159 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 22.08.2024. Verfasst von Minha Park und 8 weiteren Autor:innen. Beteiligte Einrichtung: Energy System Group, Korea Institute of Industrial Technology, Busan 46938, Republic of Korea. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Korea Evaluation Institute of Industrial Technology, R&D Program of the “Materials/Parts Technology Development Program”.
Abstract (Originalsprache)
High-manganese steel (high-Mn) is valuable for its excellent mechanical properties in cryogenic environments, making it essential to understand its deformation behavior at extremely low temperatures. The deformation behavior of high-Mn steels at extremely low temperatures depends on the stacking fault energy (SFE) that can lead to the formation of deformation twins or transform to ε-martensite or α′-martensite as the temperature decreases. In this study, submerged arc welding (SAW) was applied to fabricate thick pipes for cryogenic industry applications, but it may cause problems such as an uneven distribution of manganese (Mn) and a large weldment. To address these issues, post-weld heat treatment (PWHT) is performed to achieve a homogeneous microstructure, enhance mechanical properties, and reduce residual stress. It was found that the difference in Mn content between the dendrite and interdendritic regions was reduced after PWHT, and the SFE was calculated. At cryogenic temperatures, the SFE decreased below 20 mJ/m2, indicating the martensitic transformation region. Furthermore, an examination of the deformation behavior of welded high-Mn steels was conducted. This study revealed that the tensile deformed, as-welded specimens exhibited ε and α′-martensite transformations at cryogenic temperatures. However, the heat-treated specimens did not undergo α′-martensite transformations. Moreover, regardless of whether the specimens were subjected to Charpy impact deformation before or after heat treatment, ε and α′-martensite transformations did not occur.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Energy System Group, Korea Institute of Industrial Technology, Busan 46938, Republic of Korea.
- Department of Materials Science and Engineering, Pukyong National University, Busan 48513, Republic of Korea.
- Department of Materials Science and Engineering, Dong-A University, Busan 49315, Republic of Korea.
ORCID-Profile: Byoungkoo Kim, Byung Jun Kim
Förderung
- Korea Evaluation Institute of Industrial Technology
- R&D Program of the “Materials/Parts Technology Development Program”
Zitieren
APA
Park, M., Lee, G. H., Park, G. W., Jang, G., Kim, H. C., Noh, S., Jeon, J. B., Kim, B., & Kim, B. J. (2024). Temperature Effect on Deformation Mechanisms and Mechanical Properties of Welded High-Mn Steels for Cryogenic Applications. Materials, 17(16), 4159. https://doi.org/10.3390/ma17164159
Vancouver
Park M, Lee GH, Park GW, Jang G, Kim HC, Noh S, et al. Temperature Effect on Deformation Mechanisms and Mechanical Properties of Welded High-Mn Steels for Cryogenic Applications. Materials. 2024;17(16):4159. doi:10.3390/ma17164159
BibTeX
@article{Park2024,
author = {Park, Minha and Lee, Gang Ho and Park, Geon-Woo and Jang, Gwangjoo and Kim, Hyoung-Chan and Noh, Sanghoon and Jeon, Jong Bae and Kim, Byoungkoo and Kim, Byung Jun},
title = {Temperature Effect on Deformation Mechanisms and Mechanical Properties of Welded High-Mn Steels for Cryogenic Applications},
journal = {Materials},
year = {2024},
volume = {17},
number = {16},
pages = {4159},
doi = {10.3390/ma17164159}
}
EUVIMED