EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Preparation and Magnetic Properties of Low-Loss Soft Magnetic Composites Using MgO-Phenolic Resin Coating

Lirui Wan, Xiaoran Sun, Jiechao Li, Shen Wu iD

Materials · 14.08.2024 · 17 (16) · 4039

DOI: 10.3390/ma17164039 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 14.08.2024. Verfasst von Lirui Wan und 3 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Electromechanical Engineering and Intelligent Manufacturing, Zhengzhou Vocational College of Information Technology, Zhengzhou 450008, C…. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Henan Province science and technology project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Optimizing the interface between a magnetic powder matrix and an oxide-insulating layer is an effective method to improve the permeability and lower eddy current loss of iron-based soft magnetic composites. In this study, in order to improve the bonding strength of the substrate and insulation layer, soft magnetic composites were prepared by pressing and heat treating with reduced iron powder as a magnetic matrix, high-temperature MgO nanoparticles as insulating coating, and phenolic resin as an adhesive. The effects of MgO content on the microstructure and magnetic properties of the composites were investigated. The results of a scanning electron microscopy and an energy-dispersive spectrometer analysis corroborate that the results obtained regarding the frequency characteristics and the resistivity of the iron powder agree with the scanning electron microscope (SEM) and energy dispersive spectrometer (EDS) analysis and confirm their improvement by the presence of an insulating layer of MgO. The resistivity of the sample coated with 4 wt.% MgO is nearly 45 times higher than that of the uncoated sample under the same conditions. The MgO-insulating film formed on the surface of iron powder makes the coated sample have low effective grain size, high resistivity, and low magnetic loss at a high frequency. At 1 kHz, the magnetic loss of the 4 wt.% MgO-coated sample is reduced by 77.3%, and the magnetic loss is only 5.8% compared with the uncoated sample at 50 kHz. This magnetic loss separation study shows that the addition of MgO insulation material can effectively reduce the eddy current loss of the magnetic powder core. The 4 wt.% MgO-coated sample has the lowest hysteresis loss factor and relatively low eddy current loss factor, so it can be determined that the addition of 4 wt.% MgO is the optimum content to attain a low magnetic loss.

Schlagwörter

Stichwörter der Autor:innen

core lossinsulation coatingsoft magnetic composites

Autor:innen und Institutionen

  • Institute of Electromechanical Engineering and Intelligent Manufacturing, Zhengzhou Vocational College of Information Technology, Zhengzhou 450008, China.
  • Institute of Mechanical and Electrical Engineering, Zhengzhou University of Light Industry, Zhengzhou 450002, China.

ORCID-Profile: Shen Wu

Förderung

  • Henan Province science and technology project

Zitieren

APA

Wan, L., Sun, X., Li, J., & Wu, S. (2024). Preparation and Magnetic Properties of Low-Loss Soft Magnetic Composites Using MgO-Phenolic Resin Coating. Materials, 17(16), 4039. https://doi.org/10.3390/ma17164039

Vancouver

Wan L, Sun X, Li J, Wu S. Preparation and Magnetic Properties of Low-Loss Soft Magnetic Composites Using MgO-Phenolic Resin Coating. Materials. 2024;17(16):4039. doi:10.3390/ma17164039

BibTeX
@article{Wan2024,
  author = {Wan, Lirui and Sun, Xiaoran and Li, Jiechao and Wu, Shen},
  title = {Preparation and Magnetic Properties of Low-Loss Soft Magnetic Composites Using MgO-Phenolic Resin Coating},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {16},
  pages = {4039},
  doi = {10.3390/ma17164039}
}
Kostenlos starten →