Crashworthiness Performance and Multi-Objective Optimization of Bi-Directional Corrugated Tubes under Quasi-Static Axial Crushing
Materials · 09.08.2024 · 17 (16) · 3958
DOI: 10.3390/ma17163958 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 09.08.2024. Verfasst von Liuxiao Zou und 7 weiteren Autor:innen. Beteiligte Einrichtung: Center for Composite Materials and Structures, Harbin Institute of Technology, Harbin 150080, China. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: science foundation of national key laboratory of science and technology on advanced composites in special environments, the Science Foundation of the National Key Laboratory of Science and Technology on advanced composites in special environments.
Abstract (Originalsprache)
Longitudinal corrugated tubes (LCTs) exhibit stable platform force under axial compression but have low specific energy absorption. Conversely, circumferential corrugated tubes (CCTs) offer higher specific energy absorption but with unstable platform force. To overcome these limitations, this paper introduces a novel bi-directional corrugated tube (BCT) that amalgamates the strengths of both the CCT and LCT while mitigating their weaknesses. The BCT is formed by rolling a bi-directional corrugated structure into a circular tubular form. Numerical simulations of the BCT closely align with experimental results. The study further examines the influence of discrete parameters on the BCT’s performance through simulations and identifies the tube’s optimal design using the integral entropy TOPSIS method. A full factorial experimental approach is then employed to investigate the impact of radial amplitude, axial amplitude, and neutral surface diameter on the crushing behavior of the BCT, comparing it with the CCT and LCT. The results reveal that increasing Ai enhances the axial resistance of the structure, while increasing Aj reduces the buckling effect, resulting in a higher specific energy absorption and lower ultimate load capacity for the BCT compared to the CCT and LCT. A simultaneous multi-objective optimization of the CCT, LCT, and BCT confirms that the BCT offers superior specific energy absorption and ultimate load capacity. The optimal configuration parameters for the BCT have been determined, providing significant insights for practical applications in crashworthiness engineering.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Center for Composite Materials and Structures, Harbin Institute of Technology, Harbin 150080, China.
- Department of Engineering Mechanics, Kunming University of Science and Technology, Kunming 650031, China.
- Aerodynamics Research Institute, AVIC (Aviation Industry Corporation of China), Harbin 150080, China.
- National Key Laboratory of Science and Technology on Advanced Composites in Special Environments, Harbin Institute of Technology, Harbin 150080, China.
Förderung
- science foundation of national key laboratory of science and technology on advanced composites in special environments
- the Science Foundation of the National Key Laboratory of Science and Technology on advanced composites in special environments
Zitieren
APA
Zou, L., Wang, X., Wang, R., Huang, X., Li, M., Li, S., Jiang, Z., & Yin, W. (2024). Crashworthiness Performance and Multi-Objective Optimization of Bi-Directional Corrugated Tubes under Quasi-Static Axial Crushing. Materials, 17(16), 3958. https://doi.org/10.3390/ma17163958
Vancouver
Zou L, Wang X, Wang R, Huang X, Li M, Li S, et al. Crashworthiness Performance and Multi-Objective Optimization of Bi-Directional Corrugated Tubes under Quasi-Static Axial Crushing. Materials. 2024;17(16):3958. doi:10.3390/ma17163958
BibTeX
@article{Zou2024,
author = {Zou, Liuxiao and Wang, Xin and Wang, Ruojun and Huang, Xin and Li, Menglei and Li, Shuai and Jiang, Zengyan and Yin, Weilong},
title = {Crashworthiness Performance and Multi-Objective Optimization of Bi-Directional Corrugated Tubes under Quasi-Static Axial Crushing},
journal = {Materials},
year = {2024},
volume = {17},
number = {16},
pages = {3958},
doi = {10.3390/ma17163958}
}
EUVIMED