EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Analysis of Chip Morphology in Heavy Milling of 508III Steel Considering Different Tool Wear Conditions

Rui Guan, Yaonan Cheng iD, Jing Xue, Shilong Zhou, Xingwei Zhou, Wenjie Zhai

Materials · 08.08.2024 · 17 (16) · 3948

DOI: 10.3390/ma17163948 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 08.08.2024. Verfasst von Rui Guan und 5 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Advanced Manufacturing Intelligent Technology, Ministry of Education, Harbin University of Science and Technology, Harbin 150080, C…. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

During the process of chip formation, the chip is subjected to extrusion pressure, friction, heat, and a strong chemical reaction. The chip’s macro and micro morphology, to a certain extent, reflect the condition of the tool during the cutting procedure. Therefore, researching the macroscopic and microscopic morphology of the chip’s surface in response to different tool wear conditions is of great significance to reproducing the cutting condition and analyzing the tool wear mechanism. This paper focuses on the chips formed by milling the difficult-to-machine material 508III high-strength steel. Firstly, the 508III steel milling experiment is carried out at the actual machining site to collect chip data under different tool wear conditions. Next, the free surface morphology of chips and the bottom surface morphology of chips are analyzed. Further, the chip edges are investigated, and their causes are analyzed. Finally, heavy milling 508III steel chip curl morphology analysis is performed. The research results play important roles in revealing the mechanism of tool wear and the relationship between chip morphology and tool wear. This information can be used to provide theoretical and technical support for monitoring the tool wear status based on chip morphology.

Schlagwörter

Stichwörter der Autor:innen

508III steelchip curlingchip free surfacechip morphologyheavy milling

Autor:innen und Institutionen

  • Key Laboratory of Advanced Manufacturing Intelligent Technology, Ministry of Education, Harbin University of Science and Technology, Harbin 150080, China.
  • Industrial Center, Harbin Vocational and Technical University, Harbin 150081, China.

ORCID-Profile: Yaonan Cheng

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Guan, R., Cheng, Y., Xue, J., Zhou, S., Zhou, X., & Zhai, W. (2024). Analysis of Chip Morphology in Heavy Milling of 508III Steel Considering Different Tool Wear Conditions. Materials, 17(16), 3948. https://doi.org/10.3390/ma17163948

Vancouver

Guan R, Cheng Y, Xue J, Zhou S, Zhou X, Zhai W. Analysis of Chip Morphology in Heavy Milling of 508III Steel Considering Different Tool Wear Conditions. Materials. 2024;17(16):3948. doi:10.3390/ma17163948

BibTeX
@article{Guan2024,
  author = {Guan, Rui and Cheng, Yaonan and Xue, Jing and Zhou, Shilong and Zhou, Xingwei and Zhai, Wenjie},
  title = {Analysis of Chip Morphology in Heavy Milling of 508III Steel Considering Different Tool Wear Conditions},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {16},
  pages = {3948},
  doi = {10.3390/ma17163948}
}
Kostenlos starten →